User manual AEG MH 5 E

[. . . ] Please read and save these instructions!SPECIFIED CONDITIONS OF USE KH 5 E: The pneumatic hammer can be universally used for hammer drilling and chiselling in stone and concrete. MH 5 E: The hammer can be used for chiselling in stone and concrete. [. . . ] SAFETY INSTRUCTIONS Please pay attention to the safety instructions in the attached leaflet!Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a , , live" wire may make exposed metal parts of the power tool , , live" and shock the operator. Appliances used at many different locations including open air must be connected via a residual current device (FI, RCD, PRCD). Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. Only plug-in when machine is switched off. Keep mains lead clear from working range of the machine. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. The dust produced when using this tool may be harmful to health. Always disconnect the plug from the socket before carrying out any work on the machine. [. . . ] Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/ EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]