User manual AEG NT 1200

[. . . ] J Always keep the connection cable well away from the machine's operation area. J Never suck up into the machine any inflammable or explosive solvents, or liquids like petrol, oil, alcohol, thinners, or small particles (such as metal filings or ash) that may be hotter than 60oC - otherwise there is danger of explosion or fire!J Do not use suction on health damaging dusts. J Not suitable for sweeping up liquids which form a large foam. [. . . ] (The container can only be stood on its head for the castors to be mounted. Firmly by hand into the provided borings of the container base, as far as they will go. With the markings lined up to one another, and listen for the hose to snap into place. To remove the vacuum hose, turn the connector slightly to the right or the left and pull it out. The vacuum cleaner can be connected with several accessories res. Fit together the all­purpose nozzle, the two suction tubes, and the suction hose. Fit the upholstery nozzle directly onto the vacuum hose or onto one of the vacuum tubes. Connect power tools with the adapter onto the vacuum hose. Connect the mains cable of the power tool with the socket of the vacuum cleaner. In automatic operation, the vacuum cleaner starts automatically when the power tool is switched on. Paper dust-sack Inserting the paper dust-sack Use the paper dust-sack as well when sweeping up fine dust such as sawdust, soot, ashes, etc. Take hold of the paper dust-sack by the Cardboard edges and press them firmly against the vacuum hose connector. Fit the paper dust-sack against the wall of Switch is located above the aspiration hole and snap shut the grips. To switch on automatic control: set switch to "A" and turn the On/Off switch to "I" ­ the pilot light comes on. If a power tool is connected to the plug, the vacuum cleaner is switched on automatically together with the power tool To switch off automatic control: set switch to "N" ­ the pilot light goes out. Take care when vacuuming dry matter that all parts are completely dry, particularly the filter cartridge. Additionally use the paper filter bag when vacuuming fine dusts like grinding dust, soot, ashes, or similar. Before starting to collect up liquids, clean the dust collection container and the filter cartridge thoroughly of all dry residues, in order to avoid their getting unnecessarily dirty. remove paper dust­bag , if inserted. When the container is full, a floating valve closes the suction channel and thus prevents the container from running over. [. . . ] Fix the filter cartridge by folding back the Possible causes: ­ The collection container is full ­ The filter cartridge is clogged with fine dust ­ The suction hose, the suction tubes, or the nozzles are clogged with bulky material. When dust is being swept up the dust is thrown out through the ventilation opening. possible causes: - Filter cartridge not fitted properly - Filter cartridge damaged. If the malfunction is not caused by any of the above possibilities, please contact your local AEG after­sales services. [. . . ]