User manual AEG PST500X

[. . . ] 1, 5 m/s2 WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. [. . . ] Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron. The dust produced when using this tool may be harmful to health. Appliances used at many different locations including open air should be connected via a residual current device (FI, RCD, PRCD) of 30mA or less. Before doing any work on the machine, pull the plug out of the socket. Only plug-in when machine is switched off. Keep mains lead clear from working range of the machine. Sawdust and splinters must not be removed while the machine is running. Always use the protective shields on the machine. Do not use cracked or distorted saw blades. Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. SPECIFIED CONDITIONS OF USE This jig saw is intended to cut wood, plastic and metal; it can cut straight lines, bevels, curves, and internal cut-outs. Do not use this product in any other way as stated for normal use. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 2006/42/EC, 2004/108/EC D GB Winnenden, 2011-10-31 Rainer Kumpf Director Product Development Authorized to compile the technical file Deutsch English 9 425-207-PST500X_1. 11 08:15 MAINS CONNECTION Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. [. . . ] Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. For en nøjagtig vurdering af svingningsbelastningen skal der også tages højde for de tidsperioder, hvor apparatet er slukket, eller hvor apparatet kører, men uden at være i anvendelse. [. . . ]