User manual AEG SBE 600 R

[. . . ] Please read and save these instructions!SYMBOLS Please read the instructions carefully before starting the machine. 9 m/s2 Typical A-weighted sound levels: Sound pressure level (K = 3 dB(A)) . [. . . ] sAFETY INSTRUCTIONS Wear ear protectors. Exposure to noise can cause hearing loss. Use auxiliary handles supplied with the tool. loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Contact with a , , live" wire will also make exposed metal parts of the power tool , , live" and shock the operator. Appliances used at many different locations including open air must be connected via a current surge preventing switch. Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. Only plug-in when machine is switched off. Keep mains lead clear from working range of the machine. do not use diamond core drills on hammer mode. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. [. . . ] If needed, an exploded view of the tool can be ordered. As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]