User manual AEG SKE81221AC

[. . . ] Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. visit our website for: Get usage advice, brochures, trouble shooter, service and repair information: www. [. . . ] Contact your municipal authority for information on how to discard the appliance correctly. Do not cause damage to the part of the cooling unit that is near the heat exchanger. Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance. To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance. Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre. Before plugging in, ensure that the voltage and frequency shown on the Rating plate correspond to your domestic power supply. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not observed. The airflow behind the appliance must be sufficient. Refer to the assembly instructions for the installation. It is possible to change predefined sound of buttons by pressing together Mode and temperature colder button for a few seconds. Connect the mains plug to the power socket. Press the ON/OFF button if the display is off. The temperature indicators show the set default temperature. If the door remains open for a few minutes, the light will turn off automatically. The light is reset by closing and opening the door. Disconnect the mains plug from the Set the temperature of the appliance by pressing the temperature regulators. [. . . ] To room temperature before The door is not closed cor- Refer to "Closing the door". The compressor does not start immediately after pressing the "COOLMATIC", or after changing the temperature. This is normal, no error has The compressor starts after a Water flows on the rear plate During the automatic de- Food products prevent that water flows into the water collector. Make sure that food products do not touch the rear plate. [. . . ]