User manual AEG TS 250 K

[. . . ] Repairs should only be carried out by authorised Service Agents. Do not use saw blades which are damaged or deformed Replace the table insert when worn Before using the tool please read the instructions. if possible have the tool demonstrated. The dust produced when using this tool may be harmful to health. [. . . ] Only plug-in when machine is switched off. Keep mains lead clear from working range of the machine. Sawdust and splinters must not be removed while the machine is running. From habit of checking to see that keys and adjusting wrenches are removed from tool before turning it , , ON". Adjust the riving knife as described in this instruction manual. Incorrect spacing, positioning and alignment can make the riving knife ineffective in preventing kickback. The teeth thickness, or the set of the teeth must be thicker than the body of the blade and the riving knife. Only move the workpiece in counter rotation to sawblade (only work oppositely oriented)!For security, use devices such as safety- and pressure device, guide slide, rip fence, etc. Always keep hands away from the path of the saw blade. Never reach into the danger area of the plane when it is running. Move the rip fence out of the way when cross-cutting Never use the fence as a cut-off gauge when cross-cutting. When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop. Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur. Do not use any flanges other than those supplied or indicated in the instruction manual to secure the saw blade. Refrain from removing any cut-offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is not in the rest position. Fixed to a bench) Long workpieces must be adequately supported. Do not use cracked or distorted saw blades. Stock having a round or irregular cross section (such as firewood) must not be cut, as it can not be securely held during cutting. When sawing thin stock layed on edge, a suitable auxilary fence must be used for firm support. Transport and store the tools in a suitable receptacle; Only use tools that meet standard EN 847-1. To minimise noise, the tool must be sharpened and all noise reducing elements (covers etc. [. . . ] Danger Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Use this circular saw to cut only wood and wood like products. Do not use this product in any other way as stated for normal use. [. . . ]