User manual AEG US 400 XE

[. . . ] 1, 5 m/s2 WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60 745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. [. . . ] Cutting accessory contacting a , , live" wire may make exposed metal parts of the power tool , , live" and could give the operator an electric shock. Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less. Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. Only plug-in when machine is switched off. Keep mains lead clear from working range of the machine. always use the protective shields on the machine. Do not use cracked or distorted saw blades. Plunge cuts without pre­drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. The dust produced when using this tool may be harmful to health. SPECIFIED CONDITIONS OF USE This sabre saw cuts wood, plastic, and metal. It can cut straight lines, curves, and internal cut-outs. [. . . ] SYMBOLS Please read the instructions carefully before starting the machine. Always disconnect the plug from the socket before carrying out any work on the machine. Do not dispose of electric tools together with household waste material! [. . . ]