Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG WS 6-100. We hope that this AEG WS 6-100 user guide will be useful to you.
Lastmanuals help download the user guide AEG WS 6-100.
Detailed instructions for use are in the User's Guide.
[. . . ] please note the safety regulations , VBG , of the employer's liability insurance association. S Never reach into the danger area of the machine when it is running. S Always wear safety goggles and ear protectors when working with this machine. It is further recommended to wear safety gloves, apron, as well as sturdy non-slipping shoes. [. . . ] S Always use the protecting cap when roughing-down and separating. S Only use tools whose permitted speed is at least as high as the highest no-load speed of the machine. The grinding tool must be properly mounted and turn freely. Perform a test run for at least 30 seconds without load. Do not use damaged, out of round or vibrating grinding tools. S When grinding metal, flying sparks are produced. Take care that no persons are endangered. Because of the danger of fire, no combustible materials should be located in the vicinity (spark flight zone). S Due care should be taken that no sparks or sanding dust flying from the workpiece come into contact with you. s Pay attention to the dimensions of the grinding disc. Speed pre-selection with the setting wheel: A= lowest speed G= highest speed Turn the protective cap until the tension spring locks into place behind the fence. The protective cap can be rotated between the two fences. To remove the protective cap lift the tension spring slightly with aid of a screwdriver and completely turn it. Pull the protective cap off the spindle. Always disconnect the plug from the socket before carrying out any work on the machine. Lock the work spindle by depressing the spindle lock. When grinding do not apply pressure on the tool but use it with gentle reciprocating movements. For best results when roughing-down keep the disk at an angle of at least 30° to the working surface. Overloading the machine when grinding will damage the angle grinder and results in faster wearing out of the disks. Do not tilt the angle grinder when separating. [. . . ] Do not tilt the angle grinder when separating. The cutting disk must have a clean edge. When separating stone the guide shoe must be used!When surface grinding use a plastic backing pad with an abrasive disk. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG WS 6-100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG WS 6-100 will begin.
