Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AEG X69453MV02. We hope that this AEG X69453MV02 user guide will be useful to you.
Lastmanuals help download the user guide AEG X69453MV02.
Detailed instructions for use are in the User's Guide.
[. . . ] For Class I appliances, check that the domestic power supply guarantees adequate earthing. Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible. Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc. [. . . ] Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. Warning: Before installing the Hood, remove the protective films (white and transparent). Ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 8 1 Directional Air Outlet grille 9 1 Reducer Flange ø 150-120 mm 10 1 Dumper 16 1 Filter cover Ref. 2
11a
1
247 247
1
12a
11 482
2
2
As a first step, proceed with the following drawings: • a vertical line up to the ceiling or up to the upper limit, at the centre of the area in which the hood is to be fitted; • a horizontal line at a minimum 1004 mm above the cooker top. Mark a point (1) on the horizontal line, 247 mm to the right of the vertical reference line. Repeat this operation on the other side, checking that the two marks are levelled. Mark a reference point (2) as indicated at 210 mm from the vertical reference line and 482 mm above the cooker top. Repeat this operation on the other side, checking that the two marks are levelled. Drill at the marked points (1), using a ø 12 mm drill bit. Drill at the marked points (2) using a ø 8 mm drill bit. Insert the bracket plugs 11a into the holes (1) and tighten the screws. 1 on the wall, about 1-2 mm from the ceiling or from the upper limit, aligning the centre (notch) with the vertical reference line. Mark the wall at the centres of the bracket holes. 1 on the wall at X mm below the first bracket (X = height of the upper chimney section), aligning the centre (notch) with the vertical line. Mark the wall at the centres of the bracket holes. • Drill ø 8 mm holes at all the marked centre points. Insert the wall plugs 11 in the holes. Fix the brackets using the 12a screws (4, 2 x 44, 4) supplied with the hood. 1
EN - INSTALLATION
14
FITTING THE HOOD BODY • Open the top suction panel and fasten it to the hood body on the left using the pin, so that it does not close again. Unlock the lower suction panel by removing the fixing pin on the left, and open it. Remove the Metal grease filters using the handles provided. Adjust the two screws Vr, in the brackets 11a, so that they are at the start of their travel. [. . . ] This speed is timed to run for 5 minutes, after which the system will return to the speed that was previously set. suitable to deal with se-vere cooking fumes. It is deactivated by pressing the button or turning the motor off. Activates delayed automatic shutdown of the motor and the lighting system after 15 minuts. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG X69453MV02
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG X69453MV02 will begin.
