User manual AIPTEK DUO-V33

[. . . ] This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Move the equipment away from the receiver. [. . . ] Press the MODE key to enter the MODE menu. Use the Joystick switch to the Setting mode and press OK to enter the menu screen. Use the Joystick to select the Date & Time item, and then Press OK to confirm. Move the Joystick left/right to shift between fields. Mode icon Video resolution Picture resolution LED lights mode Macro mode Battery life Zoom ratio indicator SD card inserted Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory is inserted before recording. Zooming: Move the Zoom button up or down to zoom in or zoom out the screen. If the surroundings are dark, you can switch the LED lights mode to On or Auto to help focus and lighting. It's normal that the camcorder will feel slightly warm with continuous use / recording due to its high performance. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. Connect the camcorder (with SD card inserted) to your computer with the USB cable. If the dialogue window does not appear automatically, you may double click on "My computer" and open the "Removable Drive". Copy the files you wish to keep and save them to the desired location on your computer. Please follow the below instructions to connect your camcorder and TV via accessory AV cables for real-time display. You can display your video clips and still pictures on your TV, sharing them with your friends and family. HD TV hereby means the HDTV built-in component input ports, thus can perform HD (720P) high resolution quality while connected. Plug one end of the component video cable into the (Component Video IN) port on the HDTV and the other end into the (HD OUT) port on Camcorder. Plug one end of the other AV cable into the (Component Audio IN) port on the HDTV and the other end into the (AV OUT) port on Camcorder. (Please do not plug in the yellow connector to HDTV's AV-IN. If you record an HD resolution clip while connected to your HD TV, the TV display video resolution will down size to D1 (480P) resolution due to data bit rate, but the recorded file will remain HD (720P) with no change. Press the MODE key to enter the Mode menu. [. . . ] Single, multiple, or all files can be locked. A locked file cannot be erased by a delete function. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. Lets you select the language used for OSD. [. . . ]