User manual AIPTEK IS-DV

[. . . ] Welcome Dear user, thanks for purchasing this product. Much investment in time and effort has gone into its development, and it is our hope that it will give you many years of trouble-free service. Safety Notice 1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided. Avoid all contact with water, and dry hands before using. [. . . ] Press the Menu button (when in sub-menu). Menu illustration Menu title Menu icon Highlight bar Menu item Information bar 21 Menu items in Camera mode Power-on Press the Menu button. Item Option Description Set picture resolution to 1280x960. photos. advanced operations 1M Resolution 3M 5M Date Stamp On Print a date mark on each picture. Off Disable date mark. Stabilizer On Minimize blur caused by hand shake. Off Disable stabilizer. 22 Menu items in Camera mode (continued) Item Option Description The camera automatically adjusts white balance. Auto advanced operations Sunny This setting is suitable for outdoor recording in sunny weather. This setting is suitable for recording in cloudy weather or shady environments. This setting is suitable for indoor recording with fluorescent lamp lighting, or environments with high color temperature. This setting is suitable for indoor recording with incandescent lamp lighting, or environments with low color temperature. Image histogram displays on the screen. Disable histogram. WB Cloudy Fluorescent Tungsten On Histogram Off Auto Flashlight The flash automatically fires when the lighting is insufficient. On The flash is forced to fire in every shot. Off The flash is disabled. 23 Menu items in Camera mode (continued) Item Option Description Make recordings in natural color. Normal advanced operations Effect B&W Make recordings in black and white. Classic Make recordings in sepia-toned color. Exposure -2~+2 Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark. A positive value indicates the image will be brighter than usual; while a negative value makes the image dimmer. Selftimer On Enable the selftimer. After the selftimer is turned on, the camera will have ten seconds delay before recording when the Shutter button is pressed. Off On Icon Off Disable selftimer. Enable OSD (on screen display) icons to display on the screen. Disable OSD icons. Set the video resolution to VGA (640x480 pixels). Set the video resolution to QVGA (320x240 pixels). Video VGA QVGA 24 Menu items in Playback mode Power-on Press the Mode button Enter the Playback ( mode Press the Menu button. Item Option One All Cancel Delete current file. Delete all pictures and video/audio files stored in the memory. Description ) advanced operations Delete Slide Show - The camera displays images in sequence. Only JPEG pictures and the first frames of MPEG files will be displayed. You can press the Enter button to stop the slide show. Print current image when connected with a PictBridge-ready printer. Print all images when connected with a PictBridgeready printer. Cancel action. One All Cancel Print Before using the Print command in the menu, you need to connect the camera to a PicBridge compatible printer via the accessory USB cable. Consult the user guide of the printer for details on operations. 25 Menu items in MP3 mode Power-on Press the Mode button Enter the MP3 ( mode Press the Menu button. Item Delete One Cancel Delete current track. Description ) advanced operations Menu items in Voice mode Power-on Press the Mode button Enter the Voice ( mode Press the Menu button. Item Delete One Delete All Description Delete current voice recording. Delete all voice recordings. ) 26 Menu items in Setting mode Power-on Press the Mode button Enter the Setting ( mode Press the Menu button. Item 30 ) Option Set date and time. Description advanced operations Date & Time Beep On Enable beep sound. Off Disable beep sound. Flicker 50Hz Set flicker frequency to 50Hz. For settings reference, see page 45. Set flicker frequency to 60Hz. This option is suitable for America, Taiwan, Japan, and Korea areas. Set TV system compatibility to PAL. This option is suitable for Germany, England, Italy, Netherlands, China, Japan, and Hong Kong. 60Hz TV-out NTSC PAL On Icon Off -2~+2 Enable OSD icons to display on the screen. [. . . ] The flicker setting does not match the standard of the country you are staying. 43 Addenda When connecting the camera to the computer or TV: Problem Cause Solution Install Direct X 8. 0 or above and Windows Media 9. 0 Codecs to solve this problem. See page 29 for details on installing the software, or go to http://www. microsoft. com to download the required files. Remove the driver and other related programs. [. . . ]