User manual AIPTEK MY NOTE

[. . . ] If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Move the equipment away from the receiver. -Plug the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/television technician for additional suggestions. [. . . ] You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. FCC Compliance Statement: If the time arises to throw away your product, please recycle all the components possible. Batteries and rechargeable batteries are not to be disposed of in your domestic waste!Please recycle them at your local recycling point. Together we can help to protect the environment. Getting Started EN 2 3 4 5 7 8 6 9 0 2 3 4 5 6 7 8 Bottom view Product overview Microphone 2 LED light/strobe 3 Mirror (for self-portrait) 4 Lens 5 Clip 6 Strap holder 7 Mode switch: Camcorder ( MP3 player ( Camera ( 8 Power button 9 OLED display ) ) ) 0 Directional button LED indicator 2 Playback button 3 OK (Record/Shutter) button 4 Delete button 5 HDMI output 6 TV-out/Earphone connector 7 USB port 8 Tripod connector Product operations EN Product introduction This digital camcorder comes with the following features: · Ultra slim, pen-like compact design offers maximum mobility and freedom · 1280 x 720 (720P) HD high definition video resolution up to 30fps · Multi-functions: digital camcorder, digital still camera, MP3 player · 2. 84cm (1. 1") compact design and energy efficient high quality OLED display · Up to 5 Mega-pixel still pictures · Built-in 4GB/8GB* memory for storage · Supports MOV, JPEG, and MP3 file format · Supports USB PC connection · Supports TV-out / HDMI-out / earphone * Model dependent Charging battery When using for the first time, please charge the built-in Li-polymer battery for at least 8 hours. Make sure that the camcorder is powered off. Then, insert one end of the USB cable provided into the USB port of the camcorder and the opposite end into a powered PC. 2 The LED light will appear red to indicate that the device is charging. 3 The LED light will turn off if the charging is interrupted or complete. Note: When using a PC to charge the battery, do not power on the camcorder or it will stop charging. 2 Powering on/off EN Hold the Power button down for 1 second to turn on, or to turn off the unit. Note: ) If the camcorder fails to turn on after pressing the Power button, please recharge the battery first. 2) If an AV cable or earphone connector is plugged in upon powering on, you will be prompted to select a connection option. Display ratio Due to the nature of OLED screens, the display ratio of still picture/video on the camcorder and TV/PC will vary. Please see the following table for details. Mode Video (preview/recording) Video (playback) Picture (preview/snapshot) Picture (playback) . " OLED display (1:1) (1:1) (1:1) (1:1) TV/PC display (16:9) (16:9) (4:3) (4:3) Note: When outputting videos to a 4:3 screen, the display will be framed by black areas towards the top and bottom. When displaying pictures on a 6:9 screen, the display will be framed by black areas to the left and right. 3 Recording/Reviewing a video To record a video: 1 Poweronthecamcorderandswitchtocamcordermode( 2 PresstheOK(Record)buttontostartrecording. Usethe directionalbuttonup/downtozoomin/out. 3 Tostoprecording, presstheOK(Record)buttonagain. Note: Press the directional button to the right to enable the LED Light when operating in a dark environment. To browse a sub-folder, use the directional button up/down to select a folder and press the Playback button to enter. To return to an upper-level folder, press the OK button. 2) Only one-tier of sub folders can be accessed by the camcorder. 3) When you choose to Delete All MP3 files, the sub-folders and all of the MP3 files within them will be erased completely. ) The length of MP3 file name cannot be greater than 54 English (single-byte, including space) characters. MP3 files with names exceeding the above regulation may cause the camcorder to malfunction. PC connection When the camcorder is powered on and connected to a PC via the accessory USB cable, the system enters USB Slave mode. The internal memory is then treated as a removable disk on the PC, allowing you to directly copy or delete files stored in the camcorder. Note: Once connected to a PC, you can copy MP3 files directly into the "Music" folder for playback. EN Connecting to a standard TV and HDTV Connect your camcorder and TV via the included AV cable for real-time display. TV : Traditional CRT TV Turn on your TV and switch to AV 2 Connect the audio and video ends of 3 Turn on the camcorder. 4 Connect the other end of the AV cable TV Televisão AV mode Modo AV mode. the AV cable to the TV. Vídeo Áudio to your camcorder. 5 Select the TV icon and press the OK button. TVSAÍDA DE TV out Select the TV icon on the left TV : HDTV with HDMI input port Turn on your HDTV. [. . . ] 4 Connect the other end of the AV cable TV Televisão AV mode Modo AV mode. the AV cable to the TV. Vídeo Áudio to your camcorder. 5 Select the TV icon and press the OK button. TVSAÍDA DE TV out Select the TV icon on the left TV : HDTV with HDMI input port Turn on your HDTV. 2 Connect the HDMI-in connector (the TV larger end) of the HDMI cable to the HDTV. 4 Connect the other end of the HDMI cable to your camcorder. [. . . ]