User manual AIPTEK POCKET DV 4100M

[. . . ] Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided. Avoid all contact with water and dry hands before using. Do not expose the camera to high temperature or leave it in direct sunlight. For your own safety, avoid using the camera when there is a storm or lightning. [. . . ] above, if you wish to cancel the setting of self-timer on, press the MENU/OK button twice to disable. 20 9. Real-time display on TV Connect your camera and TV via an AV cable for real-time display. This item allows you to set the flicker to prevent nosie on your image. The default flicker value depends on your country. For details, please refer to the "More on flicker" section on page 44. 23 Display On Off This item determines whether the small icons for illustration appears on the LCD display. Default Yes This item allows you to override your current settings. Delete All Yes This item allows you to quick erase all files in the card or internal memory. Format Yes This item allows you to format the storage and thus erase all files in the card or internal memory. All files will not be recovered if you execute the format item. *The storage media illustration on the LCD display as below: Internal memory CF card The camera will use the card as the main storage media. To format the files in the card, please insert the card; to format the files in the internal memory, please remove the card. 24 Enjoying your Images and Audio Clips on the Computer 1. Installing DV 4100M driver You need to install DV 4100M driver before connecting your camera to your computer for the first time to ensure that video clips can be played back on your computer. Please follow the steps to complete the installation. Enjoying your Images and Audio Clips on the Computer 1 2 3 Turn on your computer. !! Do not connect the USB cable to your computer at this stage. Turn off other applications running on your computer. Place the supplied CD into the CD-ROM drive. Move the mouse to the icon (DV 4100M Driver) and click it. If no title appears on the screen, please follow the steps. 1. Double click the "My computer" icon. Double-click the CD-ROM drive icon (DV 4100M driver (E:)*). The name of CD-ROM drive changes depending on how your computer is set up. Browse to the "\DV 4100M driver" folder and start the Setup. exe program manually. 25 4 The "Install Shield Wizard" dialogue box is occurring and the automatic installation begins. When a window as Fig 1 appears, click "Next". Then follow the on-screen instructions to continue. Fig 1 Notice for Windows 2000 users 1. The "Digital Signature Not Found" dialogue box might show twice. The camera works well for Windows 2000. 2. Follow the on-screen instructions and click "Finish". ! Do not restart your computer at this step. 26 5 After the driver installation is completed, the program will prompt you to install Windows Media Player Codecs. If you are not sure if the codec has been installed in your computer, please click "Yes" and follow the on-screen instructions to complete the installation. Enjoying your Images and Audio Clips on the Computer Fig 2 6 After the codec installation is completed, the program will prompt you to install Direct X 8. 0 or above. [. . . ] If the "MEMORY ERROR" or "CARD ERROR" message shows on the LCD display, please set the camera to the Setting mode and format the storage media. I did not delete the picture and movie, but cannot find the data in the CF card. Check if your files are stored in the camera's built-in memory. The camera will use the card as the main storage media, and files previously stored in the internal memory will become inaccessible until the card is removed. 40 The image is too blurred. Adjust the focus. Keep the camera steady while pressing the Shutter button. Noise occurs on my camera when viewing the image on the LCD display or on the computer. Set the filter matching the place you are staying. Please refer to the "More on flicker" section on page 44. Troubleshooting When connecting the camera to your computer The driver installation failed. Please remove the driver and other related programs. [. . . ]