User manual AIPTEK POCKET PVR

[. . . ] User's Manual English FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Or press the Next ( ) button or Previous ( ) button. Press the OK key or the Play/Pause ( ) button. During playing/While paused, press the OK key or the Play/Pause ( ) button. Use the Direction buttons to move left or right. During playing, press the Menu button or use the Direction buttons to move up or down. 20 Connecting the camera to a TV Connect your camera and TV via the accessory AV cable for real-time display. You can display your video clips, still pictures, and audio recordings directly on your TV, sharing them with your friends and family. TV AV-Mode Video 2 Audio 3 4 TV OUT USB 1Turn on your TV and switch the TV to AV mode. The TV system is different across countries. To configure the TVout setting, please refer to page 29. Taiwan/America: NTSC; Europe/China: PAL) 2Connect the audio and video ends of the AV cable to the TV. 4Connect the other end of the AV cable to your camera. 2 Advanced Operations Menu operation The menu items provide several options for you to fine-tune your camera functions. The following table gives details on menu operations. How to. . . Bring up the menu Move the highlight bar Enter sub-menu/ Confirm an item Exit menu/Go back to upper menu Action Press the Menu button. Use the Direction buttons to move up or down. Press the Menu button (when in sub-menu). Menu illustration Menu title Menu icon Highlight bar Menu item Information bar 22 Menu items in Camera mode Power-on Press the Menu button. Item Option Description Set picture resolution to 1280x960. 1M 6 Mega-pixel Camera 3M Set picture resolution to 2048x1536. Resolution 6M Set picture resolution to 2816x2112. 3M 8 Mega-pixel Camera Set picture resolution to 2048x1536. 5M Set picture resolution to 2560x1920. 8M Set picture resolution to 3264x2448. Date Stamp On Print a date mark on each picture. Off Disable date mark. Stabilizer On Minimize blur caused by hand shake. Off Disable stabilizer. 23 Menu items in Camera mode (continued) Item Option Description The camera automatically adjusts white balance. This setting is suitable for outdoor recording in sunny weather. This setting is suitable for recording in cloudy weather or shady environments. This setting is suitable for indoor recording with fluorescent lamp lighting, or environments with high color temperature. This setting is suitable for indoor recording with incandescent lamp lighting, or environments with low color temperature. This setting allows you to add customsized frames to photos. 10 background frames are available on the LCD monitor. The flash automatically fires when the lighting is insufficient. The flash is forced to fire in every shot. Auto Sunny WB Cloudy Fluorescent Tungsten 1 ~ 10 PhotoFrame 0 On Histogram Off Auto Flash On Off The flash is disabled. 24 Menu items in Camera mode (continued) Item Option Description Make recordings in natural color. Normal Effect B&W Make recordings in black and white. Classic Make recordings in sepia-toned color. Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark. A positive value indicates the image will be brighter than usual; while a negative value makes the image dimmer. [. . . ] Check the "AutoPlay" box to start the playback automatically after you click a file. 3 Repeat steps 1 and 2 above until all the files you want are added. In addition to using the above method, you can also drag-and-drop files directly to the file list in the program window. Removing files To delete a file from the list, highlight it and click the "X" icon. 48 Appendix:B Step 2: Select destination Click the "Select Destination" button to select the location where your converted files will be saved. The default save location is "C:\ Documents and Settings\[current user]\My documents". [. . . ]