User manual AIPTEK POCKET DV Z200 PRO

[. . . ] Knowing your camcorder parts LED lights Battery cover Flash strobe Tripod socket SD/MMC card slot (inside the battery cover) Status LED (left) / Charging LED (right) Menu button Shutter button Previous button/ Fast backward button Play/Pause button Next button/ Fast forward button Macro mode switch Zoom (in/out) button Record button Earphone/AV-out connector USB connector * AV-in connector (optional) * Flash switch OK key/ 4:3/6:9 display switch White balance switch LED lights switch * inside the cover Note that the metallic contacts must be aligned with the contacts in the compartment. Please charge the battery at least 8 hours for first time use. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other end to a wall outlet. When the charging is interrupted or the battery pack is fully charged, the charging LED will turn green. [. . . ] Before using the Print command in the menu, you need to connect the camera to a PictBridge compatible printer via the accessory USB cable. A positive value makes the LCD brighter; while a negative value makes the LCD dimmer. Lets you select the language used for OSD. Item Option Menu Disk Printer Description When connected to a PC, the camera displays a menu for you to choose a desired connection mode. Note: The flicker setting is based on the frequency standard of your local power supply. Icon Description Full battery life Moderate battery life Low battery life * If the indicator turns red, flash strobe is disabled. Empty battery life Note: To avoid sudden outage of power supply, you are recommended to replace the battery when the icon indicates low battery life. Still picture Number of shots 130 * shoot every 30 seconds ** flash is off *** resolution is set to 5M (2560x1920) Video clip Recording time (minute) 110 * resolution is set to VGA (640x480 pixels) The actual battery life depends on your battery type and recharge level. Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Video (min. Memory SD/MMC card (MB) SD/MMC card (6MB) SD/MMC card (MB) SD/MMC card (GB) Note: The actual value of capacity may vary (up to ± 30%) depending on the color saturation and complexity of your subject and surroundings. You need to install the camcorder driver to ensure that video clips can be played back on your PC. Then place the accessory CD into the CD-ROM drive. Do not connect the camcorder to your computer at this stage. Shut down all other applications running on your computer. If the autorun screen does not appear automatically, double-click on My Computer and then the CD-ROM drive. Notice for Windows 2000 users: During the installation process, a warning message regarding digital signature may appear twice or more. Click on Next and follow the on-screen instructions to complete the installation. After the driver installation is completed, the program will prompt you to install Windows Media Player Codecs. If you are not sure whether the codecs have been installed in your computer, please click on Yes and follow the on-screen instructions to complete the installation. After the codecs installation is completed, you will be prompted to install Direct X 9. 0c or above if the program is not yet installed in your computer. After the installation is completed, you may need to restart your computer for the driver to take effect. [. . . ] If you have any other camcorder or capture device installed in your computer, please completely remove the camcorder and its driver from the computer to avoid the conflict. The device is not compatible with the camcorder. If you insert a SD card and the card is set to "Protected", this message will show up when the camcorder tries to write data into the card. When the camcorder is set to Playback mode without any existing file to play, this message will show up. [. . . ]