User manual AIPTEK POCKETCAM X

[. . . ] PocketCam X User Manual AIPTEK Service AIPTEK, Inc. 51 Discovery, Suite 100 Irvine, CA 92618, USA TEL: 949-585-9600 FAX: 949-585-9345 http://www. aiptek. com Online registration http://www. aiptek. com/registration/registration. htm (Online registration entitles you to special services, downloads and promotions. ) 1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided. [. . . ] It appears under the status of low battery only. Storage mode SD/MMC card: Flash memory: non-icon ~ 11 ~ 2. Deleting the picture and movie Follow the steps if you want to delete one picture or movie. Control buttons MENU/OK button Push the Mode switch to image you want to delete. , then press the Control buttons to pick the Press the MENU/OK button to enter the MENU. Press the Control buttons MENU/OK button. to choose "Delete One", then press the Pick "Yes" with the Control buttons complete the action of deletion. , then press the MENU/OK button to Press the Shutter/Quick Exit button if you want to quick exit the MENU at anytime. ~ 12 ~ Advanced Operation and Settings 1. Using the MENU button The MENU provides more advanced features for you to fine-tune the camera. Use the MENU/OK button to enter the MENU. Press the Control buttons to highlight the item. Then use the Shutter/Quick Exit button to exit immediately. MENU under mode The MENU/OK button is for either entering the MENU or executing an action. Select the icon to exit; or press the Shutter/Quik Exit button to quick exit. Item Option Icon MENU LCD display Description Size 2048x1536 1600x1200 1280x960 This item allows you to change the resolution of the picture. Select the "1600x1200" or "2048x1536" type when you want to develop 4x6 photos; select the "1280x960" when you want to develop 3x5 photos. Strobe Auto Off This item allows you to set the flash strobe. When you are not sure if the light is adequate, select the "Auto" mode. The strobe will fire automatically if more light is needed. If you have problems when using the strobe, please refer to "Troubleshooting". This item allows you to specify the delay for 10 seconds before the shutter fires. If you want to use the self-timer, set the "On" mode, press the Shutter button, then wait for 10 seconds with Self-Timer LED indicator flashing red. SelfTimer On Off N/A ~ 13 ~ Exposure Auto Back Light N/A This item allows you to set the exposure-metering mode. When you are not sure the source of light or when the object faces the light, select the "Auto" mode. When the object is against the light, select the "Back Light" mode. White Balance [WB] Auto Sunny Cloudy Fluorescent Tungsten N/A This item allows you to set the color temperature with the light in the certain environment. If you know the color conditions of your shooting environment, such as the "sunny" (bright), "cloudy" (dim), "fluorescent" (high color condition) and "tungsten" (low color condition) situations, select the mode you consider most appropriate. Select the "Auto" mode if you are not sure the color condition of the environment. Effect Normal B&W Classic Solarize N/A This item offers four scenes of photo imaging, such as the "Normal" (no effect), "B&W" (black and white), "Classic" (old picture), and "Solarize" (overexposed) effects. Setting See page 16 for details. MENU under mode Item Effect Option Normal B&W Icon MENU LCD display Description This item allows you to set the effect of the image, such as the "Normal" (no effect) and "B&W" (black and white) effects. N/A Setting See page 16 for details. ~ 14 ~ MENU under mode Item Delete One Delete All Option Icon MENU LCD display Description This item allows a picture or a movie stored in your built-in flash memory or the SD/MMC card to be deleted. This item allows all files stored in your built-in flash memory or the SD/MMC card to be deleted. Yes No N/A Yes No N/A Format Yes No N/A This item allows all files stored in your built-in flash memory or the SD/MMC card will be deleted and formatted. Note that all stored files will be gone and cannot be restored. Setting See page 16 for details. ~ 15 ~ 2. [. . . ] If the "MEMORY ERROR" message shows on the LCD display, please set the Mode switch to mode format the card. Cannot take pictures and movies when pressing the Shutter button . I did not delete the picture and movie, but cannot find the data in the SD/MMC card. Check if your files are stored in the camera's built-in memory. If there is a icon at the right bottom section on the LCD display, it means you are using the camera with a SD/MMC card. Please remove the card to find the data in the flash memory. (For details, see the "Removing the card" section on page 6) Charging the flash strobe requires more power of batteries. [. . . ]