User manual AIRLIVE CAMPRO HD

[. . . ] CamPro HD 64CH IP HD Camera Management Software User's Manual 1 Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. i AirLive CamPro HD User's Manual Copyright and Disclaimer FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Select a camera and click "Paste" button to update schedule setting with copied data. Click "Apply all" button to update all cameras with copied setting. You can click mouse right button on camera to bring up pop-up menu, and clone settings as above. 2. 6. 3 Select weekday of Weekly mode: When you choose Weekly mode or click on "Weekly" tab of camera list tree, the list tree will display all installed cameras of system. Click on the camera name which you want to modify. The schedule configuration of this camera will display at left of dialog. System defaults the schedule from 00:00 to 23:59 round the clock recording setting. User could modify it for your own schedule Clone Setting (copy setting from a camera): AirLive CamPro HD User's Manual 60 2. Select a camera and click "Copy" button to copy selected all weekday schedule setting. Click "Paste" button and select "Paste" will update selected camera all weekday's schedule setting. Click "Paste" button and select "Paste on Monday to Friday" will update selected camera's Monday to Friday schedule setting as same as copied Monday to Friday setting. Click "Paste" button and select "Paste on Saturday to Sunday" will update selected camera's Saturday and Sunday setting as same as copied Saturday and Sunday setting. If select a weekday , and Click "Paste" button , then select "Paste to all camera on Selected Weekday" will update all camera's selected weekday setting as same as copied camera weekday. Click "Apply all" button to update all camera's setting as same as copied camera. Clone Setting (copy setting from a weekday): 1. Select a weekday of one camera and click "Copy" button to copy selected weekday schedule setting. Select a camera and click "Paste" button, select "Paste" on pop-up menu will update same weekday's setting of selected camera. Select a weekday of camera, click "Paste" button and select "Paste" on pop-up menu will update selected weekday's setting from copied data. Click "Paste" button and select "Paste on Monday to Friday" will update selected camera's Monday to Friday schedule setting as same as copied Weekday setting. Click "Paste" button and select "Paste on Saturday to Sunday" will update selected camera's Saturday and Sunday setting as same as copied Weekday setting. If select a weekday , and Click "Paste" button , then select "Paste to all camera on Selected Weekday" will update all camera's selected weekday setting as same as copied camera weekday. Click "Apply all" button to update all camera's all weekday settings as same as copied Weekday. 61 AirLive CamPro HD User's Manual 2. Main-console 2. 6. 4 Select camera of special day mode: When you choose Special Day mode" or click "Special Day" tab of camera list tree, the list tree will display all installed cameras of system. Click on the camera name which you want to modify. [. . . ] Remote service only provides manual insert camera function. Does not support camera search button. 2. AirLive CamPro HD User's Manual 118 4. Remote Service 4. 6. 2 System setup page: 1. The language switch function only effects at remote site. [. . . ]