User manual AIRLIVE G.DUO

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AIRLIVE G.DUO. We hope that this AIRLIVE G.DUO user guide will be useful to you.

Lastmanuals help download the user guide AIRLIVE G.DUO.


Mode d'emploi AIRLIVE G.DUO
Download

You may also download the following manuals related to this product:

   AIRLIVE G.DUO DATASHEET (373 ko)

Manual abstract: user guide AIRLIVE G.DUO

Detailed instructions for use are in the User's Guide.

[. . . ] G. DUO Dual 11g Access Point User's Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive G. DUO User's Manual Table of Contents Table of Contents 1. [. . . ] If there is no such kind of mechanism exists, the two kinds of standards may mutually interfere and decrease network's performance. . Hide SSID: Enable Hide SSID will make the AP network's SSID invisible. A device can link with the AP only if correct SSID name is entered. Isolation: Enable Isolation will prevent wireless clients to see each other on the network. TX Power Level: You can set your TX Output power level here. Please note the maximum allowable TX output power in EU is 20dBm. Please do not exceed your country's legal limit. 6. 3. 4 Access Control Operation Mode -> Setup -> Access Control The G. DUO allows you to define a list of MAC addresses that are allowed or denied to access the wireless network. This function is available only for Access Point and Gateway modes. AirLive G. DUO User's Manual 62 6. Client + AP Mode Access Control List Disable: When selected, no MAC address filtering will be performed. Allow list: When selected, data traffic from only the specified devices in the table will be allowed in the network. Deny list: When selected, data traffic from the devices specified in the table will be denied/discarded by the network. 6. 3. 5 Associated Clients Click on this to show the current wireless clients associated to the AP. It will display MAC adderss, Trasmit packet, Tx rate, power saving, expire time, and signal strength. 63 AirLive G. DUO User's Manual 7. Gateway + AP Mode In this chapter, we will explain about the wireless settings for Gateway+AP Mode. Please be sure to read through Chapter 1. 4 and Chapter 3's "Introduction to Web Management" and "Initial Configurations" first. It is highly recommended that you use 2 directional antennas in this mode to achieve larger coverage and avoid mutual interference. If you need to use the supplied 2dBi Omni antennas, please adjust them according to the diagram below: 7. 1 Application for Gateway +AP Mode In this mode, both Radio1 and Radio2 are performing as AP Router. This is perfect for shopping mall or office where they can extend the coverage of the wireless IP sharing. AirLive G. DUO User's Manual 64 7. Gateway + AP Mode In this mode, the WAN port is in the LAN1. radios. It can be seen as a wireless router with 2 7. 2 Radio1: WISP Router Mode Settings Although both Radio1 and Radio2 are working as wireless router, the WAN configuration is on the Radio1 side. . When you select "Radio1" as the interface, the following screen will appear. 65 AirLive G. DUO User's Manual 7. Gateway + AP Mode 7. 2. 1 Basic Wireless Settings Band: You can choose between "802. 11g/b", "802. 11g", or "802. 11b". recommend to leave the setting at "802. 11g/b". We SSID: The SSID setting of the remote AP. If you are not sure, you can click on "Site Survey" button to scan for AP. For U. S. A. , it is 7. 2. 2 Security Settings Operation Mode -> Setup -> Security Settings Security settings allow you to use encryption to secure your data from eavesdropping. You can select different security policy to provide association authentication and/or data encryption. [. . . ] A communication system of connecting PCs and other computing devices across a large local, regional, national or international geographic area. A WAN port on the network device means the port (or wireless connection) that is connected to the Internet side of the network topology. WEP Wired Equivalent Privacy. WEP is available in 40-bit (64-bit), 108-bit (128-bit) or 152-bit (Atheros proprietary) encryption modes. AirLive G. DUO User's Manual 128 14. Wireless Network Glossary Wi-Fi Wireless Fidelity. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AIRLIVE G.DUO

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AIRLIVE G.DUO will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag