User manual AIRLIVE IP-1000R

[. . . ] IP-1000R Wired Broadband Router User's Manual 1 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. FCC Interference Statement The IP-1000R has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. [. . . ] Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory setting is "default") 2. The permissible channels depend on the Regulatory Domain. The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI); channel 7 for Japan. WEP Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it is transferred from one station to another. The standardized IEEE 802. 11 WEP (128 or 64-bit) is used here. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security, please select one WEP key to be used and input 26 or 10 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits. Pass-phrase Generator: Since hexadecimal characters are not easily remembered, this device offers a conversion utility to convert a simple word or phrase into hex. 802. 1X Setting 22 802. 1X Check Box was used to switch the function of the 802. 1X. When the 802. 1X function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802. 1X server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. 23 WPA-PSK 1. Select Preshare Key Mode If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits If ASCII, the length of preshare key is from 8 to 63. Fill in the key, Ex 12345678 24 WPA Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802. 1X server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. 25 4. 5 Port Forwarding 4. 5. 1 Virtual Server This product's NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. [. . . ] Click Start button and choose Settings, then click Control Panel. Double click Network icon and select Configuration tab in the Network window. Click Add button to add network component into your PC. Double click Protocol to add TCP/IP protocol. 5. [. . . ]