User manual AIRLIVE POE-100CAMV2

[. . . ] POE-100CAM v2 User's Manual 1/3 CMOS Dual Stream PoE IP Camera AirLive WL2000CAM User's Manual 0 Before You Use this Product This product has been designed with safety in mind. However, if not used properly, electrical products can cause fires which may lead to serious bodily injury. To avoid such accidents, be sure to heed the following: Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Heed the safety precautions Be sure to follow the general safety precautions and the "Operation Notice. " In case of a breakdown In case of system breakdown, discontinue usage and contact your authorized dealer. In case of abnormal operation · If the unit emits smoke or an unusual smell, · If water or other foreign objects enter the cabinet, or · If you drop the unit or damage the cabinet: 1 Disconnect the cable and the connecting cables. [. . . ] NoteFor security concern, it is recommended to assign Password and tick the box for password changing and validation. in AirLive POE100CAMv2 User's Manual 69 User Belongs Step3Designating a User to a Group Select the "User Belongs" tab to designate a user to a group. Select the group name and move it between "Selected group" and "Unselected group". After setting both general information and user belongs, click "Create" to save the setting. User Setting (Modify) Step1Select User Setting Select User icon in the right, the User Table display in the E-Map Interface area, when select any user icon from the User Table, the User Setting Button will display in the Menu Bar accordingly. Then click the Edit User button in the Menu Bar. Step2Modifying user Information You may change the information by modifying the general information or user belongs of that user. AirLive POE100CAMv2 User's Manual 70 Group Admin Group is the user group that has the full privilege to the Admin and Monitor programs. The user of "Administrator", system default and belong to "Admin Group", can add users and assign users to whatever user group. Monitor Group is the group for general users that has the full privilege to the Monitor program. User Group is the group for viewing monitor program only. Add Group Step1 Select the User icon in the System Setup area, then click Add User Group button the Menu Bar to add the user group' s data. Step2 Give a name to the new group and group the selected users here in one step. in AirLive POE100CAMv2 User's Manual 71 Step3 Select the "Function" tab to designate function to a group. Select the function list and move them from "Unselected function" to "Selected function". Step4 After setting both Tab of "General" and "Function", click "Create" to save the setting. Modify Group Step1Select User Group Select User Group icon in the System Setup area, the User Group Table display in the right area, when select the icon from the User Group Table, the User Group Setting Button will display in the Menu Bar accordingly. Then click the Edit User button in the Menu Bar. You may change the information by modifying the general information or function of that user group. AirLive POE100CAMv2 User's Manual 72 7. 4. 5 Area and eMap management Area refers to the geography and device scope of AirLive CamPro Express. Area is a prerequisite of any device setting (device includes: video server, LanCam, camera image, relay or sensor), AirLive CamPro Express provides multi-areas to meet user different requirement. eMap refers to (1) a hierarchical tree-structured management tool in System Setup area (2) background of the area, it could be a picture or a map (3) an interface which combines eMap background and device icon, eMap visually presents the devices in your security system. To configure a new system, select eMap icon in the System Setup to bring up the Area button in the Menu Bar. Select the newly created area under the eMap branch and use the corresponding menu options to add a LanCam or Video Server to your system or to upload a background picture to the eMap Interface. Icon Overview Icon Representing Area icon: The first level of the eMap hierarchy, the place to add a device. Video ServerDepending on the device model. There may be an image, a sensor, or a relay under this object. [. . . ] A router is sometimes included as part of a network switch. Server In general, a server is a computer program that provides services to other computer programs in the same or other computers. A computer running a server program is also frequently referred to as a server. In practice, the server may contain any number of server and client programs. [. . . ]