User manual AIRLIVE POE-200CAM V2

[. . . ] POE-200CAM v2 User's Manual 1/4 CMOS Dual Stream DOME IP Camera AirLive WL2000CAM User's Manual 0 Before You Use this Product This product has been designed with safety in mind. However, if not used properly, electrical products can cause fires which may lead to serious bodily injury. To avoid such accidents, be sure to heed the following: Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Heed the safety precautions Be sure to follow the general safety precautions and the "Operation Notice. " In case of a breakdown In case of system breakdown, discontinue usage and contact your authorized dealer. In case of abnormal operation · If the unit emits smoke or an unusual smell, · If water or other foreign objects enter the cabinet, or · If you drop the unit or damage the cabinet: 1 Disconnect the cable and the connecting cables. [. . . ] in AirLive POE200CAMv2 User's Manual 58 Step3 Select the "Function" tab to designate function to a group. Select the function list and move them from "Unselected function" to "Selected function". Step4 After setting both Tab of "General" and "Function", click "Create" to save the setting. Modify Group Step1Select User Group Select User Group icon in the System Setup area, the User Group Table display in the right area, when select the icon from the User Group Table, the User Group Setting Button will display in the Menu Bar accordingly. Then click the Edit User button in the Menu Bar. You may change the information by modifying the general information or function of that user group. AirLive POE200CAMv2 User's Manual 59 7. 4. 5 Area and eMap management Area refers to the geography and device scope of AirLive CamPro Express. Area is a prerequisite of any device setting (device includes: video server, LanCam, camera image, relay or sensor), AirLive CamPro Express provides multi-areas to meet user different requirement. eMap refers to (1) a hierarchical tree-structured management tool in System Setup area (2) background of the area, it could be a picture or a map (3) an interface which combines eMap background and device icon, eMap visually presents the devices in your security system. To configure a new system, select eMap icon in the System Setup to bring up the Area button in the Menu Bar. Select the newly created area under the eMap branch and use the corresponding menu options to add a LanCam or Video Server to your system or to upload a background picture to the eMap Interface. Icon Overview Icon Representing Area icon: The first level of the eMap hierarchy, the place to add a device. Video ServerDepending on the device model. There may be an image, a sensor, or a relay under this object. There may be an image, a sensor, or a relay under this object I/O controller: There may be a sensor or a relay under this object. Image icon: The image component of a camera. PTZ icon: The image component of a PTZ Dome camera. Relay icon: The image component of a Relay setting. Sensor icon: The image component of a Sensor setting. AirLive POE200CAMv2 User's Manual 60 Button Overview When you select eMap icon, Menu Bar will display the following functions: Button Use to Add Area: This button allows you to add a new area under eMap branch. Remove SubArea: This button allows you to remove all areas and devices that are under the eMap branch. When you select the Area icon, Menu Bar will display the following functions: Button Use to Rename the Area: This button allows you to edit a name of a selected area. Remove Area: This button allows you to remove a selected area and all devices in that area. Upload eMap: This button allows you to upload a blueprint or map to a selected area. Refresh eMap: This button allows you to refresh a blueprint or map from your PC to get updated in case a new eMap was uploaded from server or another client access. Resize eMap icon: This button allows you to change the ratio of the device icons to display on the eMap interface. Add LanCam: This button allows you to add a new IP Cam, Speed Dome and Fix Dome to the area. Add Video Server: This button allows you to add a new video server to the area. Add IO Controller: This button allows you to add an IO controller to the area. Auto Add Device: This button allows you to automatically search all IP cameras/Video server that are located at the same subnet within a LAN environment. Auto add device just support the IP cameras/Video server with UPnP supported. AirLive POE200CAMv2 User's Manual 61 Add Area Step1 Select eMap icon from the System Setup. Step2Click Add Area button from the Menu Bar. Enter the name to the "Area Name" textbox. Step3Click "Create" to save setting, a newly created area demonstrate as following: Before Add Area After Add Area . AirLive POE200CAMv2 User's Manual 62 Remove SubArea Select eMap icon, then click the Remove All Areas button. A warning message pops up confirming if you want to remove all areas and devices under area. Click "OK" to confirm. Rename the Area Select Area icon, then click the Rename Area button. You can modify this area name. Remove Area Select Area icon, then click the Remove Area button. A warning message pops up to get your confirmation. Click "OK" to confirm. Upload eMap Step1Select Upload eMap button in the Menu Bar. [. . . ] A router is sometimes included as part of a network switch. Server In general, a server is a computer program that provides services to other computer programs in the same or other computers. A computer running a server program is also frequently referred to as a server. In practice, the server may contain any number of server and client programs. [. . . ]