User manual AIRLIVE POE-FSH2442G

[. . . ] POE-FSH2442G 24+4-port Web Smart PoE Switch User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 24+4-port Web Smart PoE Switch AirLive POE-FSH2442G is in conformity with In accordance with 2004/108 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN 55022:1998+1 Description Limits and methods of measurement of radio disturbance 2002+A2:2003 Class characteristics of information technology equipmen A2:2005 Class A A1:2001 and similar electrical equipment "Harmonics and similar electrical equipment "Voltage fluctuations Information Technology equipment-Immunity characteristics-Limit And methods of measurement Safety for information technology equipment including electrica business equipment EN 61000-3-2:2000+ Disturbances in supply systems caused by household appliances EN 61000-3-3:1995+ Disturbances in supply systems caused by household appliances EN 55024:1998+A1: 2001+A2:2003 EN 60950-1:2001+ A11:2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/10/31 AirLive POE-FSH2442G CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive POE-FSH2442G je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Country lt Lietuvi [Lithuanian] Declaration Siuo OvisLink Corp. [. . . ] This feature allows users to freely and safely mix legacy and Power over Ethernet compatible devices on their network. These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex transfer modes. These ports also support the automatic MDI/MDIX crossover detection function, providing true "plug and play" capability. Just plug-in the network cable to the hub directly and regardless if the end node is a NIC (Network Interface Card) or switch and hub. 1000BASE-T Gigabit Ethernet Ports (Port 25~28): The Switch four Gigabit twisted pair ports, supported auto negotiable 10/100/1000Mbps and auto MDI/MDIX crossover detection function, this function gives true "plug and play" capability, just need to plug-in the network cable to the hub directly and don't care if the end node is NIC (Network Interface Card) or switch and hub. These ports can operate in half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps. Note: When the port was set to "Forced Mode", the Auto MDI/MDIX will be disabled. Combo mini-GBIC Ports (Port 25~26) The Switch is equipped with two combo mini-GBIC ports, supported optional 1000BASE-SX/LX mini-GBIC module. The 1000BASE-T port 25 and 26 are the same ports with the mini-GBIC port 25 and 26, when plug in the mini-GBIC module, the device will activate mini-GBIC, and the RJ45 port will be disabled. Reset: The Reset button is to reset all the setting back to the factory default. Note: Be sure that you recorded the setting of your device, else all the setting will be erased when pressing the "Reset" button. 4. 2 Rear Panel The rear panel of the Switch consists of an AC power connector and Reset button. The following shows the rear panel of the Switch. Figure 5. Rear panel AirLive PoE-FSH2442 User's Manual 6 AC Power Connector: This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100240V AC at 50-60Hz. 7 AirLive PoE-FSH2442 User's Manual Chapter 5: UNDERSTANDING LED INDICATORS The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. Figure 6. LED indicators LED Indicator Power and System PWR SYS FAN OK FAN Fail PWR MAX. Color Green Green Orange Orange Status ON OFF Blinking OFF ON ON ON Meaning Power ON Power OFF CPU is working CPU is not working System fan is working normally System fan is failed System will not provide power to the additional POE PD inserted (the system power resource remain 15. 4W) Power system has enough power more then 15. 4W Power is provided No powered device (PD) is found PoE port failure happens Port is connected Transmitting/Receiving Port is connected Works on 100Mbps Works on 10Mbps Port is connected Transmitting/Receiving Port is connected Works on 100Mbps Works on 10Mbps Works on 1000Mbps Works on 10Mbps or 100Mbps Port is inserted Mini-GBIC module No Mini-GBIC module inserted Port is connected Transmitting/Receiving OFF 100BASE-TX Port (port 1~24) PoE Green Red Orange Green ON OFF ON ON Blinking OFF ON OFF ON Blinking OFF ON OFF ON OFF ON OFF ON Blinking 8 Link/Act 100Mbps Combo 1000BASE-T/Mini-GBIC Port (port 25~26) Link/Act Orange Green Green Green 100Mbps 1000Mbps mini-GBIC 1000BASE-TX Port (port 27~28) Link/Act Orange AirLive PoE-FSH2442 User's Manual 100Mbps 1000Mbps Green Green OFF ON OFF ON OFF Port is connected Works on 100Mbps Works on 10Mbps Works on 1000Mbps Works on 10Mbps or 100Mbps 9 AirLive PoE-FSH2442 User's Manual Chapter 6: CONFIGURATION Through the Web Browser you can configure the Switch such as VLAN, Port Trunking, and Broadcast Storm . . . With the attached Web Management Utility, you can easily discover all the Web Management Switch, assign the IP Address, changing the password and upgrading the new firmware. 6. 1 Installing the Web Management Utility The following gives instructions guiding you through the installations of the Web Management utility. Insert the CD shipped along with POE-FSH2442G into your CD-Rom Drive. The Autorun. exe program should be executed automatically. If not, please run Autorun. exe manually from CD-ROM drive's root directory. Click "Install Driver And Utility". Follow the on-screen instructions to install the utility. Upon completion, go to Program Files -> Web Management Utility and execute the Web Management utility. [. . . ] Power over current: a trap when the PoE port's power is over current. Power short circuit: A trap when the PoE port's power circuit was short. Power threshold on/off: a trap when the radio of the system power supply larger than or smaller than the System power Threshold setting. 6. 11. 4 Password Setting Setting a password is a invaluable tool for managers to secure the Web Smart PoE Switch. [. . . ]