User manual AIRLIVE WFP-101UV2

[. . . ] WFP-101U v2 Wireless Multi-function Print Server User's Manual Declaration of Conformity OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product We, Manufacturer/Importer Wireless Multi-function Print Server AirLive WFP-101U v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50371:2002 Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public business equipment EN 301 489-1 V1. 6. 1 EN 60950-1:2001+A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/5/5 AirLive WFP-101U v2 CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WFP-101U v2 je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Country lt Lietuvi [Lithuanian] Declaration Siuo OvisLink Corp. [. . . ] Wireless Configuration: Search for the available wireless networks and configure the wireless settings of the MFP server for the wireless connection. MFP Server Management: For administrators to manage the MFP server. Administrators can force disconnect the current connection of the MFP server. Report: List the information of All Available MFP servers on the Network. We will explain each function separately in the following section. AirLive WFP-101U v2 User's Manual 38 5. 2 Search for All Available MFP server To run the "Server Manager" configuration utility, click the "Search" icon on the tool bar. The configuration utility will delay for several seconds because the utility is using the system's available network protocols to search for all MFP servers on the network. All available MFP servers will be listed under "Server Group" on the left side of the window. You must select the MFP server you would like to configure from the list. The system will, at the same time, display the selected MFP server's status on the right side of the window. 39 AirLive WFP-101U v2 User's Manual 5. 3 Status of MFP server Click the "Status" icon on the tool bar. The status of the currently selected MFP server will be shown on the right side of the window. The information about the MFP server includes MAC ID, Model Type, Firmware Version, status of each server port, IP address, subnet mask, default gateway and supported printing protocols. . . etc. You can refresh the MFP server's status by pressing the "Refresh" button . You can restart the MFP server by pressing the "Reboot" button . AirLive WFP-101U v2 User's Manual 40 5. 4 Set up the MFP server Click the "Setup" icon on the tool bar. The setup items of the current selected MFP server will be shown on the right side of the window. Double click one of the icons to set up the selected MFP server. A screen will pop up to verify "User Name" and "Password" of the MFP server. The default values are: User Name: admin, Password: 1234. Tip: When you have finished the settings, please click " MFP server to let the settings take effect. " to restart the 41 AirLive WFP-101U v2 User's Manual 5. 5 General Configuration Double-click the "General" icon, the login window will popup and enter user name and password, the default setting is `'admin'' and `'airlive''. After entering the username and password the General configuration window will popup. You can see basic MFP server information on this page. You also can configure the "Server Name", "User Name" and "Password" here. Server Name, the name of the MFP server. You can use this name to identify the MFP server when you are searching for the MFP server by the "Server Manger" utility. User Name / Password is used to authenticate the administrator to login the MFP server for configuring it from the "Server Manger" utility or the Web AirLive WFP-101U v2 User's Manual 42 Management tool. 5. 6 TCP/IP Configuration Double -click the "TCP/IP" icon, the TCP/IP configuration window will popup. You can configure the MFP server to automatically get an IP address from a DHCP server or manually specify a static IP. The MFP server also has a built-in DHCP server. [. . . ] How do to change the IP Address of the MFP server?A DHCP Server is installed in the network If a DHCP Server is installed, you can let the MFP server get an IP Address from the DHCP Server automatically. Open "Server Manager" and then select "TCP/IP" setting. Select "Auto IP" and click "Save". [. . . ]