User manual AIRLIVE WH-5000A

[. . . ] WH-5000A 802. 11a/b/g Wireless Outdoor AP User's Manual 0 AirLive WH-5000A User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product AirGuard Wireless Access Point WH-5000A is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential requirements of Article 3. 2 of the R&TTE Directive. Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment And services; Part 17Specific conditions for wideband data and HIPERLAN equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Information Technology equipment-Immunity characteristics-Limits And methods of measurement Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless Telecommunication System with the Basic restrictions or the reference levels related to human exposure to radio Frequency electromagnetic fields (110 MHz ­ 40 GHz ) - General public Safety for information technology equipment including electrical business equipment 301 893 v1. 2. 3 :2003 300 328 V1. 6. 1 :2004 EN EN 301 489-1 V1. 4. 1 :2002 EN 301 489-17 V1. 2. 1 :2002 EN 55022: 1998/A1 :2000/A2:2003 55024:1998/A1 :2001/A2:2003 EN EN 50385:2002 EN 60950-1:2001/ A11:2004 marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/2/9 WH-5000A CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento WH5000A je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] The AES-CCMP is a stronger encryption algorithm for newer hardware. If the clients support this new encryption algorithm, you can use it to enhance the security of wireless network. 27 AirLive WH-5000A User's Manual WH-5000A Serials User Guide 802. 11i (WPA2) The IEEE 802. 11i is a new standard that enhances the 802. 11 MAC security and authentication by stronger encryption, authentication, and key management. The WPA2 and 802. 11i are virtually identical. The WPA2 is the Wi-Fi Alliance base on the IEEE 802. 11i and runs a certification program that grants the WPA2 brand based on equipment's support of the important feature of 802. 11i. Besides the Pre-authentication function, setting WPA2 is most same as WPA, Pre-authentication Enable pre-authentication to allow a client to authenticate in advance with the AP before the client is associated with it. Allowing the AP to pre-authenticate a client decreases the transition time when a client roams between APs. Once you have selected the options you will use, click Apply to save all setting. 4. 4 MAC Address Filtering Click the entry on the left hand navigation panel for Wireless Access Point ­ MAC Address Filtering. This directs you to the Wireless Access Point ­ MAC Address Filtering page. The factory default for MAC Address filtering is Disabled. If you enable MAC Address filtering, you should also set the toggle for Filter Type. This works as follows: If Filtering AII is enabled Except and Those devices Filter Type is "Deny Listed equipped Below", only those with the authorized MAC addresses will be able to communicate with the AP. In this case, input the MAC addresses of all the PC cards that will be authorized to access this AP. If Filtering is enabled and Filter Type is "Allow AII Except Those Listed Below", those devices with a MAC address which has been entered in the MAC Address listing will NOT be able to communicate with the AP. In this case, navigate to the report: Wireless Clients and copy the MAC address of any wireless Client that you want to exclude from communication with the AP and input those MAC Addresses to the MAC Address list. 28 AirLive WH-5000A User's Manual WH-5000A Serials User Guide 4. 5 Rogue AP Detection Click the entry on the left hand navigation panel for Wireless Access Point you ­ to Rouge the AP Detection. This directs Wireless Access Point ­ Rouge AP Detection page. This function allows the network in band rogue administrator AP. Enable to detect rogue AP detection and enter the MAC Address of each AP in the network that you want the AP being configured to accept as trusted AP (You may add up to 20 APs). Enter an email address for notification of any rogue or non- trusted APs when WH-5000A find it. You can also select the following filter options. SSID Filter: Check the SSID option to only send rogue APs that match the AP's SSID or wireless bridge's SSID. Channel Filter: Check the channel filter option to only send rogue APs that match the AP's channel or the wireless bridge's channel. If both options are checked, only APs that match both the SSID and channel are sent. The Adjacent AP lists under Monitoring/Reports on the navigation menu, will detail any APs' information. 4. 6 Wireless Access Point ­ Advanced Click the entry on the left hand navigation panel for Wireless Access Point ­ Advanced. [. . . ] The configuration file can be tagged with a 12 character tag to keep track of the configuration file as it is transfer to other AirLive WH-5000A devices. 55 AirLive WH-5000A User's Manual WH-5000A Serials User Guide 11. 2 Factory Default Click the entry on the left hand navigation panel for System Administration ­ Factory Default to enter this page. The "Restore" button is a fallback troubleshooting function that should only be use to reset system to original settings. Only the Crypto Officer role has access to the Restore button. 11. 3 Remote Logging Click the entry on the left hand navigation panel for System Administration ­ Remote Logging to enter this page. Remote logging allows you to forward the syslog data from each machine to a central remote logging server. [. . . ]