User manual AIRLIVE WH-5420CPE

[. . . ] WH-5420CPE Hi-Powered Wireless Outdoor CPE User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Hi-Powered Wireless Outdoor CPE AirLive WH-5420CPE is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 6. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2004-11) EN 301 489-01 V1. 6. 1 Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50383:2002 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz ­ 40 GHz). business equipment EN 60950-1:2001/A11 Safety for information technology equipment including electrical :2004 CE marking Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/10/1 AirLive WH-5420CPE CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WH-5420CPE je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] This field is to provide for wireless client connection. 37 Channel Number: Allow user to set the channel manually or automatically. If set channel manually, just select the channel you want to specify. If "Auto" is selected, user can set the channel range to have Wireless Access Point automatically survey and choose the channel with best situation for communication. The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel. SSID of Extended Interface: This field is the SSID of remote Access Point to connect to. 802. 1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths between network nodes. Bridge loop could cause connection fail or broadcast storm. Spanning tree allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, without the danger of bridge loops, or the need for manual enabling/disabling of these backup links. Site Survey: Use this button to find out the remote Access Point and check the signal strength. To configure the security connection, please refer to Section 3. 9 Wireless Security Settings . . . . . . To configure the Advanced Settings, please refer to Section 3. 10 Advanced Wireless Settings . . . . . . To configure the access control, please refer to Section 3. 11 Access Control Settings . . . . . . To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . . 38 3. 6 WISP Mode Settings Client Mode Settings Router Settings Alias Name: Another name for WH-5420CPE. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. Band: You can choose one mode of the following you need. 2. 4GHz (B): 802. 11b supported rate only. 2. 4GHz (G): 802. 11g supported rate only. 2. 4GHz (B+G): 802. 11b supported rate and 802. 11g supported rate. The default is 2. 4GHz (B+G) mode. SSID (Network ID): The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID. [. . . ] System All: List system all log information. Wireless Only List: wireless log information only. Clear: Clear all information in window. 78 4. 6 NTP Settings This function can set system time from local computer or Internet. Current Time: Setting system time Enable NTP client update: Enable or Disable setting system from Internet NTP Server. Time Zone Select: Select system time zone. [. . . ]