User manual AIRLIVE WL-2600CAM

[. . . ] WL-2600CAM Wireless Pan-Tilt Night Vision IP Camera User's Manual BEFORE YOU USE THIS PRODUCT This AirLive product has been designed with safety in mind. However, if not used properly electrical products can cause fires which may lead to serious body injury. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Heed the safety precautions Be sure to follow the general safety precautions and the "Operation Notice. " In case of a breakdown In case of system breakdown, discontinue use and contact your authorized AirLive dealer. In case of abnormal operation · If the unit emits smoke or an unusual smell, · If water or other foreign objects enter the cabinet, or · If you drop the unit or damage the cabinet: 1 Disconnect the cable and the connecting cables. [. . . ] POP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. User name, Password: Type the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can specify up to three recipient E-mail addresses. Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters. This address is used for reply mail and sending system messages from the SMTP server. Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent according to the IP notification. Message: Type the text of the E-mail up to 384 characters. Default value provides network 45 AirLive WL-2600CAM User's Manual information including IP, Port, MAC, Model, Firmware Version and Web Version. 6. 3. 7 Wireless The wireless network has to be set up by using cable network connection. After setting the camera correctly, the wireless function can work with cable network connection. Wireless settings must be the same as the access point or ad-hoc device. When changing the settings they should always be made first in the camera and then in the wireless access point. This ensures that the camera is always accessible when making changes. Status of Wireless Network This list is the result of network scan. The network is currently linked to will be shown in blue. ESSID - The name of a wireless network (or ad-hoc device). If the same name occurs several times this means that several access points for that network were found. The camera cannot be configured to only associate with one particular access point. [. . . ] FTP -Alarm FTP - Periodical e-Mail (SMTP) -Alarm e-Mail (SMTP) -Periodical HTTP event -Alarm Alarm output- Alarm Alarm output- Timer Mon (Monday) to Sun (Sunday): The time period on the right of the checked day is the effective period of the schedule. Start time, End time: Specify the Start time and the End time. Use the same time schedule every day: When this is checked, the Start time and End time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the other days than Mon (Monday) cannot be input. AirLive WL-2600CAM User's Manual 82 7. 9 Alarm Input When you click Alarm Input on the Advance mode menu, the Alarm input setting menu appears. [. . . ]