User manual AIRLIVE WL-5460AP

[. . . ] WL-5460AP 54Mbps Multi-Function Wireless AP User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Wireless AP AirLive WL-5460AP , WL-5450AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Limits and methods of measurement of radio disturbance characteristics of information technology equipment Information Technology equipment-Immunity characteristics-Limits and Methods of measurement Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless Telecommunication System with the Basic restrictions or the reference levels related to human exposure to radio Frequency electromagnetic fields ( 110 MHz ­ 40 GHz ) - General public Safety for information technology equipment including electrical business equipment 300 328 V1. 6. 1 (2004-11) EN 301 489-1 V1. 4. 1 (2002-08) EN 301 489-17 V1. 2. 1 (2002-08) EN 55022: 1998/A1 :2000/A2:2003 55024:1998/A1 :2001/A2:2003 EN EN 50385 EN 60950-1:2001/ A11:2004 marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2005/8/17 AirLive WL-5460AP / WL-5450AP CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WL-5460AP / WL-5450AP je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive WL-5460AP / WL5450AP overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . . 3. 6 WISP Mode Settings Client Mode Settings Router Settings Alias Name: Another name for WL-5460AP. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. Band: You can choose one mode of the following you need. 2. 4GHz (B): 802. 11b supported rate only. 2. 4GHz (G): 802. 11g supported rate only. 2. 4GHz (B+G): 802. 11b supported rate and 802. 11g supported rate. SSID (Network ID): The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and must not exceed 32 characters. A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. In this mode, the SSID is the remote WISP CPE to connect to. WAN Port: WL-5460AP provides 4 methods for client to access the internet. This depends on the location and the service which the ISP provides. You need to contact the ISP for detail information. Virtual Server: You can use Virtual Server Settings to provide connection on internet. For example, you can have your own web server at home and provide access on internet. This will need port 80 by default for Virtual Server Settings. Special Application: This is to enable internet service such as sound, video and so on. The routing firewall often stops these services for security reason. DMZ: You can use DMZ Settings to provide connection on internet. For example, you can have your own web server at home and provide access on internet. This will need port 80 by default for Virtual Server Settings. Remote Management: This is to configure WL-5460AP be managed from internet. Note that port 80 is always used by web service. [. . . ] NTP Server: Select NTP Server by Server List or Manual Input. 5 System Recovery WL-5460AP provides the system recovery emergency code function that can restore the machine after firmware crashed. Please check if your WL-5460AP's serial number is e5460AP70500001 or later. If it is, it has emergency code function. Once you make sure it has emergency code function. [. . . ]