User manual AIRLIVE WLA-9000AP

[. . . ] WLA-9000AP 108Mbps 802. 11a/b/g Dual Radio Access Point User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product 802. 11a/b/g Dual Radio Access Point AirLive WLA-9000AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Broadband Radio Access Network(BRAN); 5GHz high performance RLAN; Harmonized EN Covering essential requirements of Article 3. 2 of the R&TTE Directive. Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (10MHz ­ 300GHz) -General public 301 893 v1. 3. 1 (2005-03) EN 301 489-1 v1. 6. 1 (2005-09) EN 301 489-17 v1. 2. 1 (2002-08) EN 50371:2002 EN 60950-1:2001/A11 Safety for information technology equipment including electrical :2004 business equipment marking CE Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2007/11/28 AirLive WLA-9000AP CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WLA-9000AP je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] While CCMP provides better security than TKIP, some wireless client stations may not be equipped with the hardware to support it. You can select Both to allow TKIP clients and CCMP clients to connect to the Access Point at the same time. Group Rekey Interval: A group key is used for multicast/broadcast data, and the re-key interval is time period that the system will change the group key periodically. The shorter the interval is, the better the security is. WPA2 WPA2 stands for Wi-Fi Protected Access 2. It provides stronger data protection and network access control then WPA. Only authorized users can access the wireless networks. Encryption Type: There are two encryption types TKIP and CCMP (AES). While CCMP provides better security than TKIP, some wireless client stations may not be equipped with the hardware to support it. You can select Both to allow TKIP clients and CCMP clients to connect to the Access Point at the same time. Group Rekey Interval: A group key is used for multicast/broadcast data, and the re-key interval is time period that the system will change the group key periodically. The shorter the interval is, the better the security is. WPA2-PSK Enter the Pre-shared Key to initiate WPA2 security. All devices try to access the network should have the matching encryption key. Pre-shared Key: This is an ASCII string with 8 to 63 characters. Please make sure that both the WLA-9000AP and the wireless client stations use the same key. Encryption Type: There are two encryption types TKIP and CCMP (AES). While CCMP provides better security than TKIP, some wireless client stations may not be equipped with the hardware to support it. You can select Both to allow TKIP clients and CCMP clients to connect to the Access Point at the same time. 18 AirLive WLA-9000AP User's Manual 3. Basic Configuration Group Rekey Interval: A group key is used for multicast/broadcast data, and the re-key interval is time period that the system will change the group key periodically. The shorter the interval is, the better the security is. WPA-AUTO Encryption Type: There are two encryption types TKIP and CCMP (AES). [. . . ] A pop-up window will continuously display signal strength of selected AP information in real time. The user can readjust the antenna position in order to achieve maximum signal strength. 42 AirLive WLA-9000AP User's Manual 5. Manage the WLA-9000AP 5. 6 Firmware Upgrade System tools >> Firmware Upgrade You can upgrade the firmware of your WLA-9000AP (the software that controls your WLA-9000AP's operation). Normally, this is done when a new version of firmware offers new features that you want, or solves problems that you have encountered with the current version. [. . . ]