User manual AIRLIVE WN-151ARM

[. . . ] WN-151ARM Wireless 11b/g/n 150Mbps ADSL2/2+ Router User's Manual Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user's guide. However, we are not liable for the inaccuracies or errors in this guide. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive WN-151ARM User's Manual 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. [. . . ] Click this button to get the values for DownStream and UpStream from WAN. Rate Control - The QoS will be managed by the size of the bandwidth. Priority - The QoS will be managed by the priority. AirLive WN-151ARM User's Manual 68 Category Normal-Applications: · Add a New Application (Once selected, please complete the following setups. ) · · · · Ip/Net: Enter the IP addresses. Priority: Select the desired option (High, Normal, Low) Direct: Select Upstream or Downstream as required. Self-Define · · · · · · · Name. Port Range: Enter the values for the desired port range. Ip/Net: Enter the IP addresses of your device. Priority: Select the option (High, Normal, Low) from the list. Direct: Select Upstream or Downstream as required. Special-Applications: · Add a New Application (Once selected, please complete the following setups. ) · · · · Summary Priority Name Information The priority of the application. The Name of this Application or IP Address. The general Information of this Application or IP Address. Outbound Rate: Enter the desired rate value. Inbound Rate: Enter the desired rate value. Priority: Select the desired option (High, Normal, Low) 69 AirLive WN-151ARM User's Manual 6 Overview 6. Administration Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced users. The available settings and features are: PC Database This is the list of PCs shown when you select the "DMZ PC" or a "Virtual Server". This database is maintained automatically, but you can add and delete entries for PCs which use a Fixed (Static) IP Address. Config File Backup or restore the configuration file for the WN-151ARM. This file contains all the configuration data. Logs & E-mail Diagnostics Remote Admin Routing Upgrade Firmware View or clear all logs, set E-Mailing of log files and alerts. Allow settings to be changed from the Internet. Only required if your LAN has other Routers or Gateways. Upgrade the Firmware (software) installed in your WN-151ARM. AirLive WN-151ARM User's Manual 70 6. 1 PC Database The PC Database is used whenever you need to select a PC (e. g. · · It eliminates the need to enter IP addresses. [. . . ] In Dynamic Turbo, the channel binding will be used only if necessary. In Static Turbo, the channel binding is always on. This protocol may be combined with Super-A model to increase the performance even more. The used of channel binding might be prohibited in EU countries. TX Output Power Transmit Output Power. [. . . ]