User manual AIRLIVE WN-300USB V3

[. . . ] WN-300USB V3 User's Manual Wireless 11N USB Dongle Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Wireless 11N USB Dongle AirLive WN-300USB is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN 300 328 v1. 7. 1 Description Electromagnetic compatibility and Radio spectrum Matters (ERM) Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1 technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive (2006-05) EN 301 489-1 V1. 6. 1 Electromagnetic compatibility and Radio spectrum Matters (ERM); (2005-09) Electromagnetic compatibility(EMC) standard for radio equipment EN 301 489-17 V1. 2. 1 and services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment EN 50392:2004 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0Hz ­ 300GHz ) EN 60950-1:2001+A11Safety for information technology equipment including electrica :2004 CE marking business equipment Manufacturer/Importer Signature Name Position/ Title Albert Yeh Vice President (Stamp) Date 2008/10/29 AirLive WN-300USB CE Declaration Statement Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WN-300USB je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. Country lt Lietuvi [Lithuanian] Declaration Siuo OvisLink Corp. [. . . ] Please ask the administrator of the access point you wish to connect to select a correct tunnel authentication method. This pull down menu is only available when authentication type you use is 'PEAP', `TLS / Smart Card', or 'TTLS'. 25 WN-300USB v3 User's Manual When you use 'EAP-FAST' as authentication type, the protocol setting is always 'Generic Token Card' and can not be changed. You also need to select `Soft Token' or `Static Password' as password in `ID \ Password' setting. 'EAP Fast' authentication type also have a sub-menu to set EAP fast-specific parameters: If you need to use protected authentication credential, check `Use protected authentication credential' box, and click `Import' to load . pac credential file; to remove a loaded credential file, click `Remove'. Session Resumption You can enable or disable session resumption here. If you don't know if you should enable session resumption or not, please ask your 802. 1x authentication administrator. ID \ Password tab Input 802. 1x username (ID) and password and other information if it is required here. Click `Show Password' to show the password you typed. Client Certification tab Use this tab to select a local certificate from dropdown menu. If the access point you wish to connect required a specific client certificate, the certificate must be installed on your computer, and you can select the certificate here. Server Certification tab Use this tab to use server-based certification. Please select a CA (Certificate Authority) from dropdown menu. If intermediate certificates are allowed, please select `Allow intermediate certificates'. Also, if you need to specify CA server's name, you can specify it in `Server name' field. You can select `Server name must match', so the CA server's name must be the same with the value you set in `Server name' field; If only the domain name part of full server name must the same with the value you set in `Server name' field, select `Domain name must end in specified name'. WN-300USB v3 User's Manual 26 After you complete all information related to the access point, click `OK' to save the profile, or click `cancel' to cancel adding a new profile. If the profile is created, you will see the information in the Profile List. 2. 2. 2 Using Windows Zero Configuration Windows XP and Vista has a built-in wireless network configuration utility, called as `Windows Zero Configuration' (WZC). You can also use WZC to configure your wireless network parameter: Right-click AirLive configuration utility icon and select `Use Zero Configuration as Configuration utility'. 1. 27 WN-300USB v3 User's Manual 2. Right click Windows Zero Configuration icon and select `View Available Wireless Networks'. If you can not find the icon, please follow the procedures from step 3 to step 5. 3. Click `Start' button (should be located at the bottom-left corner of windows desktop), click `Control Panel', then click `Network and Internet Connections' in Control Panel. WN-300USB v3 User's Manual 28 4. Click `Network Connections'. 5. Right-click `Wireless Network Connection' (it may have a number as suffix if you have more than one wireless network card, please make sure you right-click the `AirLive 802. 11n Wireless LAN Card), then select `View Available Wireless Networks'. 29 WN-300USB v3 User's Manual 6. All wireless access points in proximity will be displayed here. If the access point you want to use is not displayed here, please try to move your computer closer to the access point, or you can click `Refresh network list' to rescan access points. Click the access point you want to use if it's shown, then click `Connect'. 7. If the access point is protected by encryption, you have to input its security key or passphrase here. It must match the encryption setting on the access point. If the access point you selected does not use encryption, you'll not be prompted for security key or passphrase. WN-300USB v3 User's Manual 30 8. If you can see `Connected' message, the connection between your computer and wireless access point is successfully established. 31 WN-300USB v3 User's Manual 2. 3 Profile Management If you need to connect to different wireless access points at different time, like of access point of your home, office, cybercafe, or public wireless service, you can store the connection parameters (encryption, passphrase, security etc, etc. ) as a profile for every access point, so you don't have to input these parameters every time when you want to connect to a specific wireless access point. [. . . ] The longer the chip is, the greater the probability that the original data can be recovered. Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the radio can recover the original data without-the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communication systems. [. . . ]