User manual AIRLIVE WT-2000AP

[. . . ] WT-2000AP Turbo-G Wireless Access Point User's Manual Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan Declare that the product Turbo 802. 11g Wireless Broadband Router AirLive WT-2000R / WT-2000AP is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause EN Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard for radio equipment and Services; Part 17Specific conditions for wideband data and HIPERLAN equipment Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless Telecommunication System with the Basic restrictions or the reference levels related to human exposure to radio Frequency electromagnetic fields ( 110 MHz ­ 40 GHz ) - General public Safety for information technology equipment including electrical business equipment 300 328 V1. 6. 1 (2004) EN 301 489-1 V1. 4. 1 (2002) EN 301 489-17 V1. 2. 1 (2002) EN 50385:2002 EN 60950-1: 2001 CE marking Manufacturer/Importer Signature Name Position/ Title : Albert Yeh Vice President (Stamp) Date 2006/7/26 AirLive WT-2000R/WT-2000AP CE Declaration Statement Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WT-2000R/WT-2000AP je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. erklærer herved, Dansk [Danish] at følgende udstyr AirLive WT-2000R/WT2000AP overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [. . . ] This function enables you to assign another gateway to your PC, when DHCP server offers an IP to your PC. press "Client List >" button into client list page 13 AirLive WT-2000AP User's Manual 4. 6. 3 Wireless Setting, 802. 1X setting and WDS Wireless settings allow you to set the wireless configuration items. Wireless : The user can enable or disalbe wireless function. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory setting is "default") 3. The permissible channels depend on the Regulatory Domain. The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI); channel 7 for Japan. 4. 5. 6. WEP Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it is transferred from one station to another. The standardized IEEE 802. 11 WEP (128 or 64-bit) is used here. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security, please select one WEP key to be used and input 26 or 10 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits. Pass-phrase Generator: Since hexadecimal characters are not easily remembered, this device offers a conversion utility to convert a simple word or phrase into hex. 14 AirLive WT-2000AP User's Manual 7. 802. 1X Setting 802. 1X Check Box was used to switch the function of the 802. 1X. When the 802. 1X function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802. 1X server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. WPA-PSK 1. Select Encryntion and Preshare Key Mode If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits If ASCII, the length of preshare key is from 8 to 63. Fill in the key, Ex 12345678 15 AirLive WT-2000AP User's Manual WPA Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802. 1X server's domain-name. [. . . ] Set authentication type of wireless client and RADIUS server both to EAP_TLS. Disable the wireless connection and enable again. The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC1. Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. [. . . ]