User manual AIRLUX ATI83BK

[. . . ] Thank you for having chosen our induction ceramic hob. In order to make the best use of your appliance, we would advise you to read carefully the following notes and to keep them for a later consulting. The installation and connecting of the appliance have to be done by approved specialists. The manufacturer can not be responsible for damage caused by building-in or connecting errors. [. . . ] As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat sensitive object on them. The booster function [ B ] grants a boost of power to the selected heating zone. If this function is activated the heating zones work during 10 minutes with an ultra high power. The booster is foreseen for example to heat up rapidly big quantities of water, like nuddles cooking. Action Zone selection Start up the booster Stop the booster Control panel press key [ 0 ] from the zone press key [ B ] slide on the "SLIDER" or press on [ B ] When the booster function is activated, and not to exceed the maximum power, the electronic system orders to reduce automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then shows the maximum of power allowed : The other heating zone: (example: power level 9) [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone The timer is able to be used simultaneous with all 3 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. Setting and modification of the cooking time : Example for 16 minutes at power 7 : Zone selection Select the power level Select "Timer" Set the units Valid the units Set the tens Valid the tens Press display [ 0 ] selected slide on the "SLIDER" to [ 7 ] press display [ CL ] slide on the "SLIDER" to [ 6 ] press display [ 06 ] slide on the "SLIDER" to [ 1 ] press display [ 16 ] [ 0 ] and control light on [ 7 ] [ 00 ] [ 0 fixed ] [ 6 blinking ] [ 0 blinking ] [ 6 fixed ] [ 1 blinking ] [ 6 fixed ] [ 16 ] The time is confirmed and the cooking starts. Example for 13 minutes at power 7 : Zone selection Select "Timer" Deactivate the units Valid the units Deactivate the tens Valid the tens Press display [ 0 ] selected press key [ 13 ] slide on the "SLIDER" to [ 0 ] press display [ 10 ] slide on the "SLIDER" to [ 0 ] press display [ 00 ] [ 0 ] and control light on [ 13 ] [ 1 fixed ] [ 0 blinking ] [ 1 blinking ] [ 0 fixed ] [ 0 blinking ] [ 0 fixed ] [ 00 ] Automatic stop at the end of the cooking time: As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings. To stop the sound and the blinking it is enough to press the key [ 00 ]. Activate the hob Select "Timer" Set the units Valid the units Set the tens Valid the tens Press display [ 0/I ] press display [ CL ] slide on the "SLIDER" to [ 9 ] press display [ 09 ] slide on the "SLIDER" to [ 2 ] press display [ 29 ] Zone control lights are on [ 00 ] [ 0 fixed ] [ 9 blinking ] [ 0 blinking ] [ 9 fixed ] [ 2 blinking ] [ 9 fixed ] [ 29 ] After a few seconds the control light stops with blinking. As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings. To stop the sound and the blinking it is enough to press the display [ 00 ]. All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking zone starts at full power during a certain time, then reduces automatically its power on the pre-selected level. Zone selection Full power setting Automatic cooking Power level selection (for example « 7 ») Press display [ 0 ] selected slide on the "SLIDER" to [ 9 ] re-press on display "SLIDER" [ 9 ] slide on the "SLIDER" to [ 7 ] [ 0 ] and control light on pass from [ 0 ] to [ 9 ] [ 9 ] is blinking with [ A ] [ 9 ] pass to [ 8 ] [ 7 ] [ 7 ] is blinking with [ A ] Press [ 7 ] from the zone slide on the "SLIDER" This function brakes all the hob's cooking activity and allows restarting with the same settings. Press "Pause/Recall" key during 2s press "Pause/Recall" key during 2s press an other touch or slide on the "SLIDER" Displays [ II ] in the heating zone displays pause control light is blinking pause control light is off After switching off the hob (0/I), it is possible to recall the last settings. cooking stages of all cooking zones (power) minutes and seconds of programmed cooking zone-related timers Heat up function The recall procedure is following: Press the key [0/I] Then press the key [ II ] within 6 seconds The precedent settings are activated. This function allows to reach and maintain automatically a temperature of 70°C. This will avoid liquids overflowing and fast burning at the bottom of the pan. Press on key [ U ] on the "SLIDER" This function can be started independently on all the heating zones. When the pan leaves the cooking zone of the "Keep warm" function remains active during approximately 10 minutes. The maximum duration of keeping warm is 2 hours. [. . . ] Not to install the hob to the top of a not ventilated oven or a dishwasher. To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good air circulation of the electronic device. If a drawer is placed under the work, avoid to put into this drawer flammable objects (for example: sprays) or not heat-resistant objects. The safety gap between the hob and the cooker hood placed above must respect the indications of the hood manufacturer. [. . . ]