User manual AIWA AWP-ZX7

[. . . ] 4-254-179-11(2) Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Aiwa dealer regarding this product. ______________ ©2004 Sony Corporation CAUTION WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. [. . . ] or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. "PLAY TIMER", the start time, the stop time and the sound source appear in turn, then the original display returns. 21GB Timer recording radio programs -- Rec Timer You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. 10 Press ?/1 to turn off the system. Other operations To Do this Activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "SELECT REC SEL?" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Press CLOCK/TIMER SELECT. 1 2 3 2 Press . or > repeatedly until "SELECT TIMER OFF?" appears, then press ENTER. Notes Tune in the preset radio station (see "Listening to a preset station" on page 15). or > repeatedly until "REC SET?" appears, then press ENTER. "ON TIME" appears and the hour indication flashes. 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. or > repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. · You cannot activate the Play Timer and Rec Timer at the same time. · If you use the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority. · Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated. · The volume is reduced to minimum during recording. · Note that if the Rec Timer is set at the same time as the Play Timer sound source is set to tape, the Rec Timer sound may be recorded onto the tape. Rec Timer settings and the desired station appear, then the original display returns. 6 7 Load a recordable tape. Press TAPE nN on the unit repeatedly to select recording side. If you select both sides recording or front side recording, press TAPE nN on the unit to light up the N indicator. If you record on the reverse side, press TAPE nN on the unit again to light up the n indicator. 8 9 Press x. Press DIRECTION on the unit repeatedly until g appears to record on one side or h (or j) to record on both sides. 22GB Display Turning off the display -- Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. Checking the remaining time and titles (CD/MP3) Press DISPLAY during Normal Play. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Clock display* t No display (Power Saving Mode) * The clock is displayed only if you set the clock. Note You cannot perform the following operations in Power Saving Mode. ­ setting the clock ­ changing the AM tuning interval (except for European models) ­ changing the CD power manage function Tips Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time1) t Remaining time of the disc2) t Track title (disc with MP3 audio tracks3) only) t Album title (disc with MP3 audio tracks only) t Clock display (for eight seconds) t BASS level (for four seconds) t TREBLE level (for four seconds) 1) Display 2) 3) · ?/1 indicator lights up even in Power Saving Mode. · The timer continues to operate in Power Saving Mode. "­­. ­­" appears when playing back MP3 audio tracks. "­­. ­­" appears in ALL DISCS, SHUF or program play mode or when playing back MP3 audio tracks. When you play back a track with an ID3 tag ver. 1 or ver. 2, the ID3 tag appears. [. . . ] ­ Discs that have labels printed using a special ink that feels tacky when touched. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. On placement · Do not place the system in an inclined position. [. . . ]