User manual AIWA HT-DV90

[. . . ] DVD STEREO SYSTEM SISTEMA ESTEREO DVD CHAINE STEREO AVEC LECTEUR DE DVD HT-DV90 OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI En (English) E (Español) F (Français) For assistance and information call toll free 1-800-BUY-AIWA (United States and Puerto Rico) 8B-AX2-903-11 011201BCK-U-AN U ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. PRECAUTIONS Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below . CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning To prevent electric shock or injury , these safety instructions should be followed in the installation, use and servicing the unit. "CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. " Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product' s enclosure that may be of suf ficient magnitude to constitute a risk of electric shock to persons. [. . . ] It may not be played back properly PLAYING A DISC 1 To play a DVD, turn on the TV and select the proper input. On your TV, select the input from the VIDEO OUT jack (or the S-VIDEO OUT jack, if you are using S-video) of this unit. En 2 Select DVD/CD function. Press FUNCTION repeatedly on the main unit or press CD on the remote control. DVD/ 3 Press zOPEN/CLOSE to open the disc tray. 4 Place a disc with the labeled side up. 5 Press zOPEN/CLOSE again to close the disc tray. "LOADING" is displayed while the player loads the disc. If the disc is not placed correctly , "NO DISC" or "DISC ERR" appears on the unit' s display . ENGLISH 15 PLAYING DVDS AND AUDIO CDS · File extension A 3-character string added to a file name under W indows or DOS environment is called "file extension". A file extension is used mainly to identify types of files. File extension for MP3 files is ". mp3". DVDs: Playback starts automatically . If the menu is displayed, see "USING STOPPING AND PAUSING THE MENU", below . To stop playback Press s. For DVDs, "RESUME" appears and the unit remembers the point at which playback stopped. Title number Elapsed time of current title To resume playback from the point where it stopped (DVD only) Press c. Playback starts where it last stopped (Resume function). To switch the number between title and chapter , press SHIFT+TITLE/CHP. With each press, title or chapter is displayed alternately . Audio CDs function: To clear the point to be resumed (DVD only) Press s again during stop. "ST OP" appears in the TV display . The resume memory is cleared, and playback starts at the beginning of the disc when c is pressed. Last scene function (DVD only) Total number of tracks Total playing time If the disc is taken out or s is pressed to clear the resume memory , resume function is still ef fective (up to 7 discs). Next time the disc is loaded, "PRESS PLA Y TO RESUME PLAY" appears on the TV screen. To resume playback, press c while the message is displayed. If a new disc is loaded when the memory is full, the resume data for the oldest disc is erased. Last screen function may not work with some discs. 6 If playback does not start automatically, press c to start playback. To play back DVDs recorded in Dolby Digital or DTS sound See section "SURROUND PLA YBACK" (pages 24-26). To play back an MP3 disc Menu screen (SMAR T NAVI) appears on the TV screen after the disc is loaded. SHIFT+PRGM, RANDOM or REPEAT is also available. For the programed playback, see page 20. Press i, k, j or l to select the folder and press ENTER. When the play mode is program, the program file is added each time c is pressed. To start playback, press s and then press c. [. . . ] less than 1 %, 6 ohms) Reference: 50 W (40 - 200 Hz, T. H. D. less than 10 %, 6 ohms) Total harmonic distortion 0. 2 % (10 W, 1 kHz, 6 ohms, DIN AUDIO, Front) Power output Audio output characteristics Frequency range: 20 Hz to 20 kHz Operating conditions 5°C to 35°C (41°F to 95°F) Speaker system Front, Surround, Center: full range, 100 mm (4 in. ) bass reflex type Subwoofer: 200 mm (7 7/8 in. ), bass reflex type Impedance 6 ohms Maximum input power 55 W (peak) Dimensions (W x H x D) SX-F90 (Front) : 1 15 x 153 x 138 mm (45/8 x 6 1/8 x 5 1/2 in. ) SX-R90 (Surround) : 115 x 153 x 138 mm (45/8 x 6 1/8 x 5 1/2 in. ) SX-C90 (Center) : 153 x 115 x 138 mm (61/8 x 4 5/8 x 5 1/2 in. ) TS-W90 (Subwoofer) : 180 x 335 x 390 mm (71/8 x 13 1/4 x 15 3/8 in. ) Weight SX-F90 (Front) : 1 kg (2 lbs 3 oz) Speakers Input/output Input AUDIO VIDEO 1 IN, AUDIO VIDEO 2 IN: 370 mV (47 kohms) OPTICAL IN VIDEO 1, OPTICAL IN VIDEO 2: accept linear PCM signals and Dolby Digital and DTS surround bitstream (32 kHz, 44. 1 kHz, 48 kHz, and 96 kHz) VIDEO VIDEO 1 IN, VIDEO VIDEO 2 IN: 1 Vp-p (75 ohms, unbalanced) AUDIO VIDEO 1 OUT: 350 mV (47 kohms) OPTICAL OUT VIDEO VIDEO 1 OUT, VIDEO OUT: 1 Vp-p (75 ohms, unbalanced) S-VIDEO OUT Y output: 1 Vp-p (75 ohms) C output: 0. 286 Vp-p FRONT SPEAKERS: accept speakers of 6 ohms SURROUND SPEAKERS: accept speakers of 6 ohms CENTER SPEAKER: accepts speakers of 6 ohms SUB WOOFER terminal: 6 ohms SUB WOOFER jack: 1 V PHONES (mini jack): accepts headphones of 32 ohms or more SX-R90 (Surround) : 0. 8 kg (1 lbs 12 oz) SX-C90 (Center) : 1 kg (2 lbs 3 oz) TS-W90 (Subwoofer) : 4. 9 kg (10 lbs 13 oz) Specifications and external appearance are subject to change without notice. Output · Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. · Manufactured under license from Digital theater Systems, Inc. [. . . ]