User manual AIWA HV-GX1100

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. [. . . ] When you want to record an album from an MP3 disc, be sure to press PLAY MODE repeatedly to select ALBM, then press ALBUM ­ or + to select the desired album before proceeding. 4 5 Press CD SYNC. Deck B stands by for recording. "REC" flashes. Press REC PAUSE/START. When a tape is inserted, corresponding forward (N)/ reverse (n) indicators light. The reverse indicator lights up only for JAX-N88/N77/N66/N33/PK88/ PK77/PK66. Recording starts. To stop recording Press x. continued 19GB To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 3 and 4, perform steps 2 to 6 of "Creating your own program" (page 13). Tip Recording on a tape manually -- Manual Recording You can record just the portions you like from a CD, tape or radio program on a tape. You can also record from connected components (see "Hooking up optional components" on page 27). Use buttons on the unit for the operation. For JAX-N88/N77/N66/N33/PK88/PK77/PK66, if you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side. 1 2 Load a recordable tape into deck B, then press TAPE A/B repeatedly to select deck B. (JAX-N88/N77/N66/N33/PK88/PK77/ PK66 only) Press PLAY MODE repeatedly to select "g" to record on one side. Select "j" (or "RELAY") to record on both sides. When you want to record from the reverse side, press hH twice or until the TAPE B reverse side indicator lights up. Then press x. 3 Press one of the following buttons to select the desired source to record. · CD: To record from this system's CD player. · TAPE A/B: To record from this system's tape deck A. · TUNER/BAND: To record from this system's tuner. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. 9 To Press ?/1 to turn off the system. Other Operations Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "PLAY SELECT" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 2 3 Tune in the preset radio station (see "Listening to a preset station" on page 16). or > repeatedly to select "REC SET", then press ENTER. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "TIMER OFF" appears, then press ENTER. Notes "ON" appears and the hour indication flashes. 4 Set the time to start recording. · You cannot activate the Play Timer and the Rec Timer at the same time. · If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. · If the system is on at the preset time, the Play Timer will not be activated. Tip Press . or > repeatedly to set the hour, then press ENTER. or > repeatedly to set the minute, then press ENTER. 5 The system turns on 15 seconds before the preset time. Set the time to stop recording following the same procedure as step 4. The type of timer ("REC TIMER"), the start time, the stop time, and the preset radio station to be recorded (e. g. , "TUNER FM 5") appear in turn, before the original display returns. 6 7 Load a recordable tape into deck B. Press ?/1 to turn off the system. 24GB Other Operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. Display 2 Press . [. . . ] · Place the system in a location with adequate ventilation to prevent heat buildup in the system. · If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. · To prevent a malfunction, do not cover the ventilation hole for the cooling fan. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. [. . . ]