User manual AKAI DVR3300SS

[. . . ] Important Safety Instructions WARNING The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNI NG:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM This product contains a low power laser device. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 PRODUTO LASER CLASSE 1 This symbol means that the unit complies with European safety and electrical interference directives. The symbol for Class II (Double lnsulation) On Placement · Do not use the Unit in places which are extremely hot, cold, dusty, or humid. [. . . ] Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. · About two seconds later, playback continues from the new angle you selected. · If no button is pressed within 10 seconds, playback continues without changing the current angle. Sequence of angle shots (Example) Notes: · This function can only be used for discs on which scenes shot from multiple angles have been recorded. · If only one angle is recorded, " 1/1 " is displayed. Audio selection On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. While a disc is playing, press the AUDIO button to show the current audio format number. 2. Press the AUDIO button repeatedly to select the desired audio format. Notes : · If only one audio format is recorded, the number does not change. · About two seconds later, playback continues in the new audio format. - 20 - (continued on next page) DVD Playing a Disc Subtitle selection 1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example below. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. Notes : · If only one language is recorded, the language does not change. · About two seconds later, playback continues with the new subtitle you selected. · The number of languages recorded differs depending on the disc. · If no button is pressed within a few seconds, playback continues without changing the current subtitle. · This function can only be used for discs on which subtitles have been recorded in multiple languages. · On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the main menu. - 21 - DVD Basic playback Special Functions DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE. · While the disc is playing, press the DISPLAY button to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Remaining time: Remaining time of the title which is currently playing. [. . . ] Press the to return to normal play mode. · Fast forward or fast reverse is performed. · Make sure that AUDIO output and AV IN input connections correct. · The DTS DVD disc cannot be decoded to have speaker output. [. . . ]