User manual AKAI DVR4000SS

[. . . ] Important Safety Instructions WARNING The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. 8. 9. 10. 11. 12. 13. Read Instructions - All the safety and operating instructions should be read before the product is operated. [. . . ] It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start playback of the disc. Notes: · Use the OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you may damage the Unit. · Let the disc tray open completely before removing the disc. Press the OPEN / CLOSE button to close the disc tray after you remove the disc. · Some Video CD are recorded with PBC (Playback Control), a menu with recorded contents may appear on the TV if you have turned the PBC on. You can make your selection according to its PBC menu. Press the MENU button on the remote control to turnPBC on and off anytime during you are playing back a Video CD. Pausing playback (still mode) Press the II PAUSE button. To resume normal playback, press the PLAY button. Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button. If you press the STOP button twice, To skip to a different track the Unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. · Press the PREV button on the remote once to skip to the start of the previous track. · Press the NEXT button on the remote to skip to the next track. · For audio CD disc, use the number buttons (remote control only) to jump straight to that track number. E - 18 (continued on next page) Playing a Disc Fast Forward/Fast Reverse DVD CD VCD 1. Press the TUNING or TUNING button when a disc is playing. · The disc begins fast scan at x2 speed. or TUNING · Four speeds are available. Each time TUNING button is pressed, the speed of fast scan changes in the following sequence: 2. Press the PLAY button when you reach the desired point to resume playback at normal speed. Slow-motion play DVD 1. Press the SLOW or SLOW button in the play mode. Each time SLOW or SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 2. [. . . ] · This Unit is too hot, shut off half 30 minutes for cool down. · You can use the Pink Noise setting to test that the speaker output is present (Please see Customizing the Function Settings) · Check that the speakers and equipment are connected securely. · Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from a TV set or fluorescent light. · Move your TV away from the audio equipment. [. . . ]