User manual AKAI LCT3201TD

[. . . ] Safety Guidelines Caution: Always use a power cable is properly grounded. Please use the AC cords listed below for each area: USA . . . . . . . . . . . . . . . . . . . . . . CSA/cUL FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] You can access the menu using the buttons on your LCD TV or remote control. The OSD menu displayed in the following sequence (circular display): Video Audio Misc TV Geometric (Continued on next page) 22 Press Menu button to display the menu system. Press Enter button on the remote control or Source button on the side panel to activate the function settings in the menu. Press , , or button to select or adjust a setting, press Enter button to confirm. If you do not make a selection within 15 seconds, the main menu closes automatically; the other menus close automatically within 6 seconds. To close an on-screen menu instantly, press Menu button on the remote control or MENU button on the side panel. Menu Enter Source The Side Panel MENU SOURCE 6. 6 OSD Functions of TV System 1 Using the Video Menu Option Contrast Brightness Back Light Saturation Hue Sharpness Phase Color Temperature Advanced Picture Adjust Note: Press / 0~100 0~100 Bright, Middle, Dark 0~100 -30~+30 0~7 0~31 Cool, Middle, Warm, User Description Reduce/Enhance Darken/Brighten Adjust the balance of back light Decrease/Increase of color Decrease/Increase Soften/Sharpen Decrease/Increase Adjust the balance of whitening Adjust the picture effect Video Menu is just for TV, AV, S-Video, Component, DVD input source mode. It is not available in other input source mode. When smart picture mode is pre-set, the value of the above settings will be different according to different input source. (Continued on next page) 23 Adjustment of "Contrast" Press Menu button on the remote control, and then press or until the "Video" menu appears. Press Enter button to confirm and display a status bar as below. Press button to decrease that will soften the color. Press that will make white area more bright. Press Enter button to confirm the adjustment and return. button to increase Adjustment of "Brightness" Press Menu button, and then press or button until the "Video" menu appears. Press Enter button to confirm and display a status bar as below. Press button to decrease. Press button to increase that will brighten the dark area for seeing the objects in shadowness more clear. Press Enter button to confirm the adjustment and return. 24 Adjustment of "Back Light" Press Menu button, and then press or button until the "Video" menu appears. Press Enter button and then press or button to select one of "Bright", "Middle" or "Dark" for the balance of back light. Press Enter button to confirm the adjustment. Press button to return. Adjustment of "Saturation" Press Menu button, and then press or button until the "Video" menu appears. Press Enter button to confirm and display a status bar as below. Press button to decrease. Press button to increase that will make color more intensive. Press Enter button to confirm the adjustment and return. 25 Adjustment of "Hue" Press Menu button, and then press or button until the "Video" menu appears. Press Enter button to confirm and display a status bar as below. Press button to decrease that will make image more green. [. . . ] (Continued on next page) 58 Symptom Power cannot be turned on. (Power indicator does not light) No Input Signal message appears. Solution - Check that both ends of the power cable are plugged into the socket appropriately. - Check that the signal line is connected properly. - Check that the power of the relevant peripherals is turned on. [. . . ]