User manual AKAI QX4200HT

[. . . ] TABLE OF CONTENTS IMPROTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LOCATION OF CONTROLS AND INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Connect your headphone to the phones jack (13) of the unit, and the speakers will cut off automatically. 16 15 14 13 2 3 4 5 6 POWER SUPPLY AND SET TIME This set operates on AC 230V ~ 50Hz 12 11 10 7 9 1. 6. Insert the AC Power Cord(27) into a convenient standard outlet. " " shown on display(1) blinks. Press STANDBY Button(18) to turn on the unit, LCD will show " ". Press CLOCK button(14) once, then display become " ", press PROG. / SET / MEMO button(9) the hour digital will blinks, then press SKIP/FAST SEARCH / TUNING button(10) to adjust hour, press PROG. / SET / MEMO Button (9) again to store your adjusted hour and minute digital will blinks. Press SKIP/FAST SEARCH / TUNING (10) button to adjust minute. / SET / MEMO Button(9) immediately to store your desired time and the LCD Display(1) will return to " ". Press STANDBY Button(18) to turn it to standby mode, the LCD backlight will be off and the time is displayed. LISTENING TO THE RADIO 1. USE OF REMOTE CONTROL 1. Open the Battery Compartment Insert two AAA batteries (not supplied), make sure to match "+" and "-" of the batteries to marks in the battery compartment. Press SET / MEMO Button(9), Indicators of MEMO and the preset station number " " will flash. Press SET / MEMO Button(9) again to store the tuned station into the selected preset location. The LCD Display(1) will show " " in FM band, if in MW band will showing " ". Repeat step 1 through 3 to preset other stations. CONNECT THE SPEAKER 1. Connect the right and left speaker Wire (28) to the Speaker Terminal(25), BLACK/WHITE wire connect to RED terminal, BLACK wire connect to BLACK terminal. For better stereo effect, place two Speakers Box(29) in a certain distance. LISTENING TO THE PRESET STATIONS 1. Press PRESET STATION / Button(5) repeatedly to select your desired preset number, the band and preset number will show on the LCD Display(1), after one second the preset number will change to show the radio frequency. 2. Note : Keep the speaker wires away from the antennas to prevent noise. Black & White Black FOR BEST RECEPTION : FM : Extend and move the FM Antenna Wire (25). If stereo broadcast received, the STEREO indicator will be displayed at LCD Display(1). If the broadcast signal is weak, change to MONO mode by press TUNER/BAND Button(16). MW : This unit is equipped with a built-in directional ferrite antenna, move and rotate the unit. -GB- 7 - -GB- 8 - PRECAUTIONS FOR DISCS HANDLING DISC - To keep the disc clean, do not touch the play sides of the disc. - Do not attach paper or ape to the disc. [. . . ] * Do not attach adhesive tape, stickers, etc. * Clean the disc periodically with a soft , lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. * If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched). [. . . ]