Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AKG C 400 BL. We hope that this AKG C 400 BL user guide will be useful to you.
Lastmanuals help download the user guide AKG C 400 BL.
Detailed instructions for use are in the User's Guide.
[. . . ] When lying on a table or lectern the microphone element is very close to a "boundary" (the tabletop). This design prevents any comb filter effects or other acoustic interferences which would normally exist at microphone positions close to reflecting surfaces. In other words, the microphone will only pick up sounds arriving from above the supporting surface. [. . . ] This reduces the number of microphones needed, noise due to pages being turned, the number of mixer inputs required, etc. In rooms with difficult acoustics, however, we recommend to use one microphone for each delegate. Repainting the Microphone If the microphone is too conspicuous at its final location, you may repaint it in the color of the surface it will be mounted on. Paint the microphone case in a wellventilated room and be sure to observe the instructions provided by the paint manufacturer. When using spray paints, wear a respirator and use a spray booth. Use a screwdriver to unsnap the bottom plate as shown in fig. 9, use a screwdriver to carefully unsnap the circuit board carrying the microphone element. Degrease the outside surface of the case by cleaning it with alcohol. Paint the case in the desired color using acrylic paint or synthetic-resin enamel. important: Do not use nitrocellulose paints. They attack plastics and may damage the microphone case. Snap the cirucit board and the bottom plate back into place. Use the supplied screws to fix the installation plate at the desired location. Fixing the Microphone with Adhesive Tape If you do not want to drill holes into the supporting surface or only want to fix the microphone temporarily, attach the microphone with double-stick tape. Remove the protective film from the tape and press the microphone against the supporting surface at the desired location. Both the C 400 BL and C 400 BL-1 are condenser microphones and therefore need a power supply. [. . . ] Important: Recommended phantom power supplies for the C 400 BL and the C 400 BL-1 with PA 400 are the optional N 62 E or N 66 E AC power supplies or B 18 battery supply (also optional) from AKG. Using any power supplies not recommended by AKG may damage your microphone and voids the warranty. Clean the plastic surface of the microphone with alcohol. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AKG C 400 BL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AKG C 400 BL will begin.
