User manual AKG C 562 CM

[. . . ] The two diaphragms are electrically connected out of phase. Impacts will move both diaphragms in the same direction so unwanted noise will be canceled out. Sound will move the diaphragms in opposite directions so the two output signals will add in phase. The microphone capsule is a patented design that prevents perspiration and moisture from penetrating into the transducer. [. . . ] The microphone capsule is a patented design that prevents perspiration and moisture from penetrating into the transducer. A special clear plastic ring makes sure that perspiration and makeup will not clog the sound entries on the microphone body. The microphone is available in three different colors and will almost disappear when blended in with an actor's or singer's makeup. An external windscreen supplied with the microphone reduces wind noise when using the microphone on an open-air stage. The C 562 CM is identical to the CK 77 WR, except that it operates on 9 to 52 V universal phantom power to DIN 45596/IEC 268-15 and is available in black only. ), with 3-pin mini XLR connector for use with AKG bodypack transmitters. ), with 3-pin mini XLR connector for use with AKG bodypack transmitters. ), with phantom power adapter with integrated 3-pin XLR connector. With no phantom power via an AKG phantom power supply. Check what type of connector you need and solder the connector to the microphone cable. You can use the supplied adhesive compound or H 40/1 clip to fasten the microphone on various instruments (e. Since the microphone will sit very close to the sound source, you can set the gain control on the console to a rather low level. This means that the feedback risk in a live situation will be very low. To find the best position of the microphone on the instrument, try several different places on the instrument and compare the sounds. If you mount the microphone on a wind instrument, consider slipping the supplied W 77 windscreen on the microphone to reduce blowing noise. In theater work, the microphone grill and sound entry may become clogged by makeup and perspiration. Place the grill in an ultrasonic cleaning bath of the type jewelers use to clean jewelry. This is the best way to clean even the smallest orifices in the grill. Screw the grill back on the cable module. If the microphone fails due to condensation caused by perspiration after long periods of use on the body, you can replace the transducer element in the field. [. . . ] This is the best way to clean even the smallest orifices in the grill. Screw the grill back on the cable module. If the microphone fails due to condensation caused by perspiration after long periods of use on the body, you can replace the transducer element in the field. To replace the transducer element, you do not even need to remove the microphone from the actor's body. [. . . ]