User manual AKG K 1000

[. . . ] Please keep the manual for future reference. 2 Unpacking Your headphones system comprises the following components: 1 pair of headphones 1 transmitter with integrated battery charging feature 2 stereo connecting cables with gold plated connectors for linking the transmitter to your audio source: 1 RCA cable, 1 jack cable (mini jack to 2 x RCA connectors) 1 mini jack/1/4" jack adapter 1 AC adapter for powering the transmitter 2 1. 2 V AAA size NiCd rechargeable batteries for powering the headphones (inside the headphones) 1 charging cable for charging the rechargeable batteries inside the headphones. If anything is missing, contact your AKG dealer immediately. [. . . ] If the headphones output on your equipment is a 1/4" jack, plug the supplied mini jack to 1/4" adapter jack onto the connecting cable. Before connecting the transmitter to your audio source, switch the audio source OFF. Plug the red RCA connector (right channel) on the supplied connecting cable into the red LINE OUT R or REC OUT R socket and the white RCA connector (left channel) into the white LINE OUT L or REC OUT L socket on your audio source. Note that the transmitter will automatically switch OFF about 4 minutes after switching OFF your audio source (stereo, VCR, TV set, etc. 1 Charging the Batteries In order to ensure the longest possible service life for the rechargeable batteries, we deliinside the Headphones ver them uncharged. Therefore, charge the supplied batteries before first operating your headphones system. The supplied batteries have been inserted into the headphones for your convenience. WARNING: If you operate the headphones on dry batteries (see section 4. 3), never try to charge the batteries using the transmitter's charging feature. This would cause serious damage to your headphone system. Dispose of used batteries conforming to local waste disposal rules. 4 Important Notes clicks which at high volume settings may affect your hearing. Therefore, be sure to set the VOLUME control (6) on the headphones to minimum before switching between different sources (tuner, turntable, CD player, etc. Listening over headphones at high volume levels, particularly over extended periods of time, may damage your hearing. For physical reasons that have nothing to do with the quality of the product, extremely strong interference sources may affect reception. In order to maintain interference-free listening pleasure, do not operate your K 1000 in the close vicinity of radio equipment, cellular telephones, or directly above TV or computer monitor picture tubes. The supplied connecting cable is long enough to allow the transmitter to be placed at a safe distance from interference sources. Interference caused by other users of the 914 or 864 MHz LPD band are beyond AKG's control. We recommend to clean the transmitter and headphones surfaces using a soft cloth moistened with water. Batteries are not correctly aligned with polarity marks. Connect charging cable or push connectors all the way into the charging jacks. Audio level at transmitter input is too low. [. . . ] Limited Warranty (valid in the United States only) AKG warrants AKG products against evident defects in material and workmanship for a period of one year and agrees to repair or, at our option, replace any defective unit without charge for either parts or labor. This Warranty does not cover dry or rechargeable batteries. Important: This Warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any but the specified receptacles. This Warranty is void unless service or repairs are performed by an authorized service center. [. . . ]