Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AKG SR 40 SINGLE. We hope that this AKG SR 40 SINGLE user guide will be useful to you.
Lastmanuals help download the user guide AKG SR 40 SINGLE.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in the equipment. The equipment may be used in dry rooms only. The equipment may be opened, serviced, and repaired by authorized personnel only. [. . . ] Please keep the Manual for future reference. Should any item be missing, please contact your AKG dealer. 3 VOLUME: This rotary control adjusts the receiver's output level from microphone to line level for matching to the input sensitivity of your mixer or amplifier. 4 RF OK: This LED illuminates to indicate that signal is being received. If no signal is received or the automatic squelch is on, the RF OK LED goes out and the audio output is muted. 5 AF CLIP: This LED illuminates to indicate the audio level of the received signal is overloading the receiver's audio section. 6 Color code lines: The color indicates the receiving frequency of the receiver. Transmitters tuned to the same frequency are marked with the same color. 8 AUDIO OUT: Balanced TRS 1/4" jack, adjustable from mic to line level. You can connect the output either to an XLR microphone input or to an unbalanced line input on a mixer or amplifier. The automatic squelch circuit switches the receiver off if the received signal is too weak, in order to suppress the related noise or the residual noise of the receiver while the transmitter is off. Prior to setting up your WMS 40 system, check that the transmitter and receiver are tuned to the same frequency. The easiest way to do this is to compare the color codes on the transmitter and receiver. â· You can either use the receiver freestanding or mount it in a 19" rack using the optional RMU 40 PRO rack mounting kit. Reflections off metal parts, walls, ceilings, etc. Place the receiver near the performance area (stage). Make sure, though, that the transmitter will never get any closer to the receiver than 10 ft (3 m). Check that you can see the receiver from where you will be using the transmitter. [. . . ] Turn GAIN control down or up just enough to stop the distortion. Switch off interference sources or defective appliances or use a WMS 40 SINGLE tuned to a different frequency; have electrical installation checked. (Bodypack transmitter only:) GAIN control is set too high or too low. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AKG SR 40 SINGLE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AKG SR 40 SINGLE will begin.
