User manual ALAN MIDLAND G7

[. . . ] Combing the latest technology in radio communication along with a sturdy mechanical frame, the Midland G7E XT makes the ideal and effective solution for both the professionals who need to stay in touch with colleagues (construction sites, buildings, hotels, trade fairs, shows) or with leisure users that just want to keep up with friends and family. Its robust frame, ease of use and simple design mean that it is ideal for use in any activity. the Midland G7E XT is extremely practical and operates on the PMR446 band (please see chart in user guide for restrictions on use). The Midland G7E XT incorporates all the functions that you would expect to see on the latest and most advanced two way radio transceivers and guarantees reliability and maximum efficiency. [. . . ] Using a different battery charger other than the one specified can cause damage to your device or may even cause explosions and personal injuries. Do not throw batteries into fire or place them near heat as this may cause explosions or personal injuries. Dispose of the batteries according to procedures set out by local regulations. Do not mix old and new batteries or batteries of different types or batteries which have been used in different manners. Press twice MENU [17] until the display shows the channel with the CTCSS tone [9] flashing on the right ("of" default condition). To confirm the setting, press the PTT [11] key or wait for approximately 5 seconds. To deactivate CTCSS tones If you want to operate with no CTCSS code: 1. Press twice the MENU [17] key until the display shows the desired channel and the CTCSS [9] tone blinking on the right. 3 Choosing high or low transmission power Batteries are drained more quickly during transmission. In order to extend the battery life you can select the low power when transmitting over short distances. If you want to transmit a longer distance repeat the above procedure to select the high power. When the batteries are in good conditions, high power is 500mW, whereas low power is 10mW. A low battery level during transmission will reduce the performance of your device. 4 VOX function Midland G7E XT enables hands free conversations through VOX function. The sensitivity of VOX function can be adjusted in 2 different levels. You can enable VOX function with or without accessories. To disable the VOX function follow the instructions above and select option oF. 5 Vibra-Call function Midland G7E XT is equipped with the "Vibra-Call" feature, which provides a silent alert for incoming calls. to activate it , follow these steps: 1. Press the MENU [17] button for 5 times, until the display shows [6]; 2. Use the / [19] buttons to disable or enable this feature (on: enables, oF:disables); 3. Push PTT [11] to confirm or wait for 5 seconds. [. . . ] MONITOR/SCAN button- Press this button once to activate SCAN (scanning of channels). Keep the same button pressed for about 2 seconds to activate MON function. 3; 2) Insert the batteries pack into the battery compartment; 3) Replace the battery cover and fix the belt clip. 1 Turning on/off To turn on the transceiver, turn the VOLUME [10] knob clockwise until you hear it clicks: the LCD display will light up and do an Auto-Test. [. . . ]