User manual ALBA RDVD1002

[. . . ] RDVD1002. book Page 1 Tuesday, January 24, 2006 12:25 PM RDVD1002 DVD Recorder User Guide RDVD1002. book Page 2 Tuesday, January 24, 2006 12:25 PM RDVD1002 Introduction Thank you for purchasing this DVD Recorder which has been designed and manufactured to give you many years of trouble-free service. You may already be familiar with using a similar product but please take time to read these instructions which have been written to ensure you get the very best from your purchase. Safety is Important To ensure your safety and the safety of others, please read the Safety precautions before you operate this DVD Recorder. Keep this information in a safe place for future reference. THIS DVD RECORDER UTILISES A CLASS 1 LASER. [. . . ] Press the RECORD DISC button to enter the Record/Disc menu. The Record / Disc menu is displayed as shown on the previous page. Use the UP or DOWN ARROW buttons to highlight Auto Chapter. Press the RIGHT ARROW button to highlight the currently selected Auto Chapter Time. Use the UP or DOWN ARROW buttons to highlight the Auto Chapter Time you want. You can select from 5 min, 10 min, 15 min and off. Press the PLAY/ENTER button to select the Auto Chapter Time. Press the RECORD/DISC button to exit the Record/Disc menu. 30 RDVD1002. book Page 31 Tuesday, January 24, 2006 12:25 PM DVD Recorder OTR Recording One Touch Recording (OTR) allows you to start recording at the touch of a button. Insert a Disc Press the EJECT button to open the disc drawer and insert a disc. Press the EJECT button to close the disc drawer. The Media Type will be displayed, followed by the Disc Information Display. Press the PLAY/ENTER button to remove the Disc Information DIsplay NOTE: If the disc is inserted upside down, the DVD Recorder will not recognise that any disc has been inserted. Select a Source To select source, press the SOURCE/AV button repeatedly to cycle through the available options. These are Scart, Front AV, Front SV or Tuner. If you are recording from the TV Tuner, select the correct channel using the PR+ or PR- buttons. To Start/stop a Recording Before recording, make sure that you have set the correct Recording Quality as described in page 29 or alternatively press the REC. QUALITY button repeatedly to cycle through the available options. To begin recording, press the REC/OTR button. The Record symbol will be displayed in the top left corner of the screen. The Elapsed Recording time is displayed on the LCD panel on the front of the DVD Recorder. To Pause Recording Press the PAUSE button to pause the recording process. The Record Information bar will be displayed as shown below. The Record Information bar will display the current elapsed recording time, source, recording quality and the remaining recording time. Press the PAUSE button to resume recording. 31 RDVD1002. book Page 32 Tuesday, January 24, 2006 12:25 PM RDVD1002 To stop recording, press the STOP button. The word `STOPPING' will be displayed on screen. NOTE: This may take up to a minute to complete. 32 RDVD1002. book Page 33 Tuesday, January 24, 2006 12:25 PM DVD Recorder Timer Recording Setting the Correct Date and Time To perform timer recording events, the DVD Recorder must be set to the correct date and time. This should have been done when completing the Initial Setup Wizard when the DVD Recorder was first turned on. If this has not been completed, follow the instructions below. [. . . ] Check that the sound has not been muted on either the DVD Recorder or the television. Check that all cables are connected securely. Press the AUDIO button to select other audio tracks on the DVD. Check the disc is either DVD+R or DVD+RW. [. . . ]