User manual ALCATEL-LUCENT SPEEDTOUCH 610 1

[. . . ] SPEEDTOUCH 610 CLI Reference Guide Business DSL Routers 3EC 16982 ACAA TCZZA Edition 01 Status Change Note Released BD F aa 39813 Short Title CD-RG ST610 R4. 1 CLI All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel. 2 / 384 3EC 16982 ACAA TCZZA Edition 01 Contents Contents About this Document . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 ADSL Commands . 5 27 31 37 47 61 69 75 109 129 137 141 161 179 199 207 261 269 281 287 305 311 317 323 331 337 3EC 16982 ACAA TCZZA Edition 01 3 / 384 Contents 26 27 28 Syslog Commands . [. . . ] Choose between: G llc/snap G vcmux A number between 0 and 65535. Represents the number of Wide Area Network (WAN) connection setup retries before giving up. REQUIRED OPTIONAL intf [dest] [qos] OPTIONAL [encaps] OPTIONAL [retry] OPTIONAL EXAMPLE: =>ipoa iflist IPoA_PVC1 : dest : Br4 Retry : 10 QoS : default Encaps : llc/snap Connection State : connected Fcs : off =>ipoa ifconfig intf=IPoA_PVC1 encaps=llc/snap retry=15 =>ipoa iflist Moreipoa : dest : Br4 Retry : 15 QoS : default Encaps : llc/snap Fcs : off Connection State : connected RX bytes: 0 frames: 0 TX bytes: 0 frames: 0 dropframes: 0 => RELATED COMMANDS: ipoa ifadd ipoa ifattach ipoa ifdelete ipoa ifdetach ipoa iflist Create a new Routed IPoA interface. Show current Routed IPoA interfaces. 3EC 16982 ACAA TCZZA Edition 01 203 / 384 14 IPoA Commands ipoa ifdelete Delete a Routed IPoA interface. SYNTAX: ipoa ifdelete intf intf = <ifname> The name of the Routed IPoA interface. REQUIRED EXAMPLE: =>ipoa iflist Newipoa : dest : Br3 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 Moreipoa : dest : Br4 Retry : 10 QoS Connection State =>ipoa ifdelete intf=Moreipoa =>ipoa iflist Newipoa : dest : Br3 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 => : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 : default Encaps : llc/snap : not­connected Fcs : off : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 RELATED COMMANDS: ipoa ifadd ipoa ifattach ipoa ifconfig ipoa ifdetach ipoa iflist Create a new Routed IPoA interface. Show current Routed IPoA interfaces. 204 / 384 3EC 16982 ACAA TCZZA Edition 01 14 IPoA Commands ipoa ifdetach Detach a Routed IPoA interface. SYNTAX: ipoa ifdetach intf intf = <ifname> The name of the Routed IPoA interface. REQUIRED EXAMPLE: =>ipoa iflist Newipoa : dest : Br3 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 Moreipoa : dest : Br4 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 =>ipoa ifdetach intf=Moreipoa =>ipoa iflist Newipoa : dest : Br3 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 Moreipoa : dest : Br4 Retry : 10 QoS Connection State => : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 : default Encaps : llc/snap : not­connected Fcs : off RELATED COMMANDS: ipoa ifadd ipoa ifattach ipoa ifconfig ipoa ifdelete ipoa iflist Create a new Routed IPoA interface. Show current Routed IPoA interfaces. 3EC 16982 ACAA TCZZA Edition 01 205 / 384 14 IPoA Commands ipoa iflist Show all or a specified Routed IPoA interface(s). SYNTAX: ipoa iflist [intf] [intf = <ifname>] The name of the Routed IPoA interface. If not specified all Routed IPoA interfaces are listed. OPTIONAL EXAMPLE OUTPUT: =>ipoa iflist Newipoa : dest : Br3 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 Moreipoa : dest : Br4 Retry : 10 QoS Connection State RX bytes: 0 TX bytes: 0 => : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 : default Encaps : llc/snap Fcs : off : connected frames: 0 frames: 0 dropframes: 0 RELATED COMMANDS: ipoa ifadd ipoa ifattach ipoa ifconfig ipoa ifdelete ipoa detach Create a new Routed IPoA interface. Detach a Routed IPoA interface. 206 / 384 3EC 16982 ACAA TCZZA Edition 01 15 IPSec Commands 15 IPSec Commands ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec config flush saclear salist show cert (to access the IPSec Cert level) cert clearall cert crlconfig cert export cert import cert list cert refresh cert remove cert request cert cep (to access the IPSec Cert CEP level) cert cep cancel cert cep config cert cep list cert cep request cert cep resubmit connection (to access the IPSec Connection level) connection add connection config connection delete connection list connection start connection stop 3EC 16982 ACAA TCZZA Edition 01 207 / 384 15 IPSec Commands ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec ipsec descriptor (to access the IPSec Descriptor level) descriptor add descriptor delete descriptor list peer (to access the IPSec Peer level) peer add peer config peer delete peer list policy (to access the IPSec Policy level) policy assign policy flush policy list policy troff policy tron policy unassign policy chain (to access the Policy Chain level) policy chain create policy chain delete policy chain flush policy chain list policy rule (to access the Policy Rule level) policy rule clear policy rule create policy rule delete policy rule flush policy rule list policy rule stats 208 / 384 3EC 16982 ACAA TCZZA Edition 01 15 IPSec Commands ipsec config Show/set global IP Security (IPSec)/Virtual Private Networking (VPN) configuration. SYNTAX: ipsec config [state] [trace] [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>] Enable or disable IPSec/VPN operation and processing. By default the IPSec/VPN processing is disabled. OPTIONAL OPTIONAL 3EC 16982 ACAA TCZZA Edition 01 209 / 384 15 IPSec Commands ipsec flush Flush complete IPSec/VPN configuration (inclusive IPSec policy settings). SYNTAX: ipsec flush 210 / 384 3EC 16982 ACAA TCZZA Edition 01 15 IPSec Commands ipsec saclear Flush all Internet Key Exchange (IKE) and Authentication Header (AH)/Encapsulating Security Payload (ESP) Security Associations (SAs). SYNTAX: ipsec saclear RELATED COMMANDS: ipsec salist Show a list of the current SAs. 3EC 16982 ACAA TCZZA Edition 01 211 / 384 15 IPSec Commands ipsec salist Show all currently active IKE (Phase 1) and AH/ESP (Phase 2) SAs. SYNTAX: ipsec salist RELATED COMMANDS: ipsec saclear Flush all current SAs. 212 / 384 3EC 16982 ACAA TCZZA Edition 01 15 IPSec Commands ipsec show Show IKE and certificate(s) configuration. SYNTAX: ipsec show [format] [format = <{pretty|cli}>] Show intuitive output (pretty) or reflect configuration via CLI commands configuration (cli). By default the pretty"output is shown. [. . . ] To avoid unrestricted and unauthorized access to the SpeedToucht it is highly recommended always to make sure that it is protected by a SpeedToucht system password and to change it regularly. SYNTAX: system setpassword password password = {<string>|$_BOARD_SERIAL_NBR} the system password can be set to either: G <string> A free to choose password <string> G $_BOARD_SERIAL_NBR Equal to the SpeedToucht device serial number's nine numerical digits. REQUIRED IMPORTANT NOTE: The code serial number is printed on the marking label found on the bottom of the SpeedToucht. It consists of the concatenation of the string 'CP' followed by nine digits. [. . . ]