User manual ALCATEL F860

[. . . ] This telephone is built-in with Smart Call Block feature*. This feature will help you avoid nuisance calls by only allowing some numbers to make your phone ring. [. . . ] When this mode is chosen, VIPS OK is displayed on the LCD in idle mode unless you have unread messages / missed calls (to enable, see part 2. This extra feature allows you to block call that do not have a number attached to them (ie private calls, international calls, etc). This option can be enabled on top of any of the previous four (to enable, see part 3) Manual call block mode Manual call block is the easiest option when starting out. When you chose ON in the call block settings, all calling numbers registered in your blacklist will be blocked. You can add/remove numbers from that list at any time. How to block an incoming call: When the phone is ringing and before answering, press . It will terminate the call and offer you the option to register the number to the blacklist in one click. Then to confirm the registration of this number in the blacklist, press < >. IMPORTANT: if you don't confirm, the number will not be added to the blacklist and the next call will go through normally. After you enable this option, the call block icon will be displayed on the LCD. NOTE: 2 more ways to add incoming and outgoing call numbers in Block list: 1. From incoming call numbers - Press < >, press < > or < > to select CALL LIST - Press < > to show selected number, press < save to Block list. [. . . ] Will only disappear from the LCD if the regular call block Hereby, ATLINKS EUROPE declares that the radio equipment type DECT is in compliance with Legislation: Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UKCA declaration of conformity is available at the following internet address: www. [. . . ]