User manual ALCATEL TEMPORIS 200

[. . . ] TEMPORIS 200 TM Plug one end of the spiral cord into the handset at (A), and the other end into the socket on the left side of the phone (B). l l l Programación durante una llamada l l l l 13. ENVIRONMENT This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which manufacturers' are responsible. [. . . ] L block calls to phone numbers with more than 6 digits. 1 ACCESSING THE PROGRAMMING MODE For each of the 3 operations, you need to go into programming mode first. 2 LOCK / UNLOCK Press the Programming key followed by 1. Peg for wall mounting Affx emergency number label here 10 Memory Key Press the key. 1 ACCESO AL MODO DE PROGRAMACIÓN Message waiting lamp Memory and set programming keys Redial / Pulse Mute key Additional services access key 7. 3 MODIFYING THE PASSWORD Go into programming mode again and then: l Press the Programming key followed by 2. Go into programming mode again and then: l l 1. 4 IF YOU FORGET THE PASSWORD Press the Programming key followed by 0. This operation clears all the settings, EXCEPT the memories. 1 RINGER LAMP / MESSAGE WAITING LAMP This light flashes in time with the ringer when you receive a call. It goes out as soon as you take the line. If you are connected to an ALCATEL PABX with a voicemail service, the message waiting lamp tells you there is a message in your mailbox. CONFIGURATION FOR PROFESSIONAL USE Skip this chapter if your TEMPORIS is connected directly to the public network. 1 ACCESSING THE PROGRAMMING MODE For each of the 3 operations, you need to go into programming mode first. Fig 1 fig 2 To return to the initial volume, press the limiter les appels à des numéros de téléphone n'excédant pas 6 chiffres. 2 TYPE OF DIALLING l Press the Programming key followed by 2. The Mute key puts your correspondent on hold so that you can talk to someone else without the first person hearing. 1 beep is emitted on the line every 10 seconds. To resume the conversation, press the Mute key again. 3 FLASH DURATION (R) Go into programming mode again and then: l l To erase the last dialled number l l l Press the Programming key followed by 3. Press: 1 for a 100 ms flash, 2 for a 300 ms flash, 3 for a 600 ms flash. 5 ADDITIONAL SERVICES KEYS* These function keys provide quick access to additional services (ask your network operator or installer for details). [. . . ] Programming while calling l Pick up the handset. L Press the Programming key, whether you are already in conversation or not. The stored number is dialled automatically. CUSTOMERS SERVICE The store where you bought the telephone is in a position to give you information and provide after-sales service. [. . . ]