User manual ALCATEL TEMPORIS 250

[. . . ] TEMPORIS 250 TM Plug one end of the spiral cord into the handset at (A), and the other end into the socket on the left side of the phone (B). l l l Programación durante una llamada l l l l 13. ENVIRONMENT This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has implemented a specific collection and recycling system for which manufacturers' are responsible. [. . . ] 3 MODIFYING THE PASSWORD Go into programming mode again and then: l Press the Programming key followed by 2. Go into programming mode again and then: l INSTALLATION Connecter le cordon à spirales au combiné (A) et à la prise située sur le côté gauche du téléphone (B). 4 IF YOU FORGET THE PASSWORD Press the Programming key followed by 0. 1 RINGER LAMP / MESSAGE WAITING LAMP This light flashes in time with the ringer when you receive a call. It goes out as soon as you take the line. If you are connected to an ALCATEL PABX with a voicemail service, the message waiting lamp tells you there is a message in your mailbox. There are two different ways of dialling: l by lifting the handset, then dialling. 2 DIALLING IN ON HOOK MODE Press the hands-free key then dial your correspondent's number. 3 HANDS-FREE MODE If you are talking to somebody on the handset, and you want to hear and talk to them over the loudspeaker instead: l This operation clears F The password is resetall the settings, EXCEPT the memories. CONFIGURATION FOR PROFESSIONAL USE Skip this chapter if your TEMPORIS is connected directly to the public network. 1 ACCESSING THE PROGRAMMING MODE For each of the 3 operations, you need to go into programming mode first. 2 TYPE OF DIALLING l Press the Programming key followed by 2. E Position murale Position horizontale " The people around you can join in the conversation. L l For tone dialling l l Adjust the volume using the and keys. Lift the handset to return to private conversation mode. 4 HANDSET VOLUME CONTROL When the hands-free function is off, you can increase the handset volume. 3 FLASH DURATION (R) Go into programming mode again and then: l l HINWEIS: An die verbleibende freie Buchse (E) kann ein Modem angeschlossen werden. l Das Etikett mit den Notrufnummern an die dafür vorgesehene Stelle kleben. To return to the initial volume, press the key. Press the Programming key followed by 3. Press: 1 for a 100 ms flash, 2 for a 300 ms flash, 3 for a 600 ms flash. 5 MUTE l The Mute key puts your correspondent on hold so that you can talk to someone else without the first person hearing. [. . . ] Programming while calling l Pick up the handset. L Press the Programming key, whether you are already in conversation or not. The stored number is dialled automatically. CUSTOMERS SERVICE The store where you bought the telephone is in a position to give you information and provide after-sales service. [. . . ]