User manual ALCATEL TEMPORIS RETRO

[. . . ] OPERATION Caller ID FEATURES Caller ID (CID) is a service available from your local telephone company. For Caller ID to work on this system, you must subscribe to Caller ID service. This unit can receive the FSK type 1 & 2 and DTMF caller ID without any setting. This information may include the phone number, date and time; The unit stores up to 70 calls for later review. [. . . ] When the Mute function is activated, the display will show “Muting…”. You can press the button again to release the mute function. sHORT GLOSSARY OF TERMINOLOGY USED IN THIS MANUAL VISUAL MESSAGE WAITING INDICATOR BATTERY LOW INDICATION BORRAR REGISTRO DE REMARCACIÓN Hook switch. The part of the phone that pops up to activate the phone line when the handset is lifted from the base. A term used to describe the phone in its active mode when the handset is off of the base cradle. A term used to describe the phone in an inactive mode. uNIT’S DATE / TIME The Unit’s Date / Time will NOT be shown after the Batteries installed. It can be set by incoming FSK type I / II Caller ID or Date / Time set menu. If you set the system clock by Date / Time set menu, it will never be updated by incoming Caller ID. If the system clock is firstly set by incoming Caller ID after the power up, it will be automatically updated by each Caller ID received. If a DTMF Caller ID is received, the receiving date / time for that Caller ID will be recorded as the system clock. The VMWI will blank if there have a message in the centralized voice mail system. You need to contact your services provider for more details. When the LCD display shows the battery low icon, you need change a new battery (3 x AA) to ensure the unit is properly to operate. BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: • a base and handset. TROUBLESHOOTING TIPS No Dial Tone • Check all cabling to make sure that all connections are secure and not damaged. € Check hook switch: Does it fully extend when handset is lifted from cradle?No Information is Shown After the Phone Rings • Are you subscribed to Caller ID service from your local telephone company?€ Be sure to wait until the second ring before answering. Phone Dials in Pulse with Tone Service • Make sure T/P DIAL MODE is set to TONE DIAL. Phone Won't Dial Out with Pulse Service • Make sure T/P DIAL MODE is set to PULSE DIAL. Phone Does Not Ring • You may have too many extension phones on your line. [. . . ] When you hang up, the telephone automatically returns to pulse dialing mode. cONNECTING THE TELEPHONE LINE PRE-DIALING 1. Connect one end of the straight telephone line cord to the jack on the back of the base. Connect the other end to a wall phone jack. [. . . ]